Thx...we'll still make a great progress & finish before Christmas for sure!

Thank you :)

The following figures are based on a total number of work units of 530,000,000 from cubes (project scientist) with the addition of Seippel (WCG tech).

Last 30 day average results:434,149
Estimated end date using 30 day average: October 28, 2016
Percent Complete:78.277%
The average length of a WU is currently running about 4.71 hours, more than last week, with a few longer days in between.

If I look at the latest batch I have received, 20780, that would be about 78.4% complete. (I subtracted out the batches from 20297 to 20378 as they were all the "error" batches )and I have yet to see any of them come through my machines yet.)

We are at about 8.84 more months (approx. 265 days)of additional crunching at the current recent run rate. The days in th e past week ,on average, had about average run times. However on Friday and Saturday there were some batches which exhibited some extra long long times. I had a few which ranged up to 16 hours versus the "normal" 4 to 6 hours. Recovery from the error batches continues. The projected completion date has increased slightly since last week. Production recovered a bit this past week going from about 2.99 million WU's to 3.01 million WU's completed. Getting back to about 3.5 million work units per week will start to move that completion date closer. Remember, the situation can change at any time and these are only estimates.


Cheers

Thanks for this new update Sgt.Joe

The following figures are based on a total number of work units of 530,000,000 from cubes (project scientist) with the addition of Seippel (WCG tech).


Last 30 day average results:446,269
Estimated end date using 30 day average: October 20, 2016
Percent Complete:78.9393%
The average length of a WU is currently running about 4.06 hours, more than last week, with a few longer days in between.

If I look at the latest batch I have received, 20765, It is a batch which is lower than last week, so I can not use this measure to provide an estimate by this means. Hopefully by next week the batches will resume their measured progression as we should have completed the problematic batches.

We are at about 8.34 more months (approx. 250 days)of additional crunching at the current recent run rate. The days in the past week ,on average, had about average run times. Recovery from the error batches continues. The projected completion date has decreased slightly since last week. Production recovered a bit this past week going from about 3.01 million WU's to 3.51 million WU's completed. Getting back to about 3.5 million work units per week will start to move that completion date closer. Remember, the situation can change at any time and these are only estimates.


Cheers