Index  | Recent Threads  | Unanswered Threads  | Who's Active  | Guidelines  | Search
 

Quick Go »
No member browsing this thread
Thread Status: Active
Total posts in this thread: 311
Posts: 311   Pages: 32   [ Previous Page | 8 9 10 11 12 13 14 15 16 17 | Next Page ]
[ Jump to Last Post ]
Post new Thread
Author
Previous Thread This topic has been viewed 666687 times and has 310 replies Next Thread
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

Hexcore with 4GB is tight for running this with 6 concurrent, but think XP-32 could not even address more, and probably cant even use more than 3.1GB.

Set Swapfile to zero, boot, try again just one or two. Then do a disk-defrag and after create a new VM. Set that at 6GB (1.5x RAM) as fixed minimum and free expendable to bigger.

What I can say from my experience is that 4 GBs are enough for a Hexacore. I ran 6 betas simultaneously on my machine. TaskManager only reported 43%, but taskmanager often only reports crap. I use a 64 Bit system, though.
Another reason could be an overloaded HardDisk, which isn't a problem in my case either as I do use a SSD.
[Sep 16, 2010 3:41:31 PM]   Link   Report threatening or abusive post: please login first  Go to top 
nanoprobe
Master Cruncher
Classified
Joined: Aug 29, 2008
Post Count: 2998
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

Hexcore with 4GB is tight for running this with 6 concurrent, but think XP-32 could not even address more, and probably cant even use more than 3.1GB.

Set Swapfile to zero, boot, try again just one or two. Then do a disk-defrag and after create a new VM. Set that at 6GB (1.5x RAM) as fixed minimum and free expendable to bigger.

What I can say from my experience is that 4 GBs are enough for a Hexacore. I ran 6 betas simultaneously on my machine. TaskManager only reported 43%, but taskmanager often only reports crap. I use a 64 Bit system, though.
Another reason could be an overloaded HardDisk, which isn't a problem in my case either as I do use a SSD.

My other hexcore is Win7 64 with 4GB and it never missed a beat on the betas. I have the next 3 days off so I'll be able to dig into it and see if I can find what caused the crashes.

Thanks for the suggestions Sek. I will look into all of that.
----------------------------------------
In 1969 I took an oath to defend and protect the U S Constitution against all enemies, both foreign and Domestic. There was no expiration date.


[Sep 16, 2010 4:02:55 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Mathilde2006
Senior Cruncher
Germany
Joined: Sep 30, 2006
Post Count: 269
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

Message from a wingman:
<core_client_version>5.10.45</core_client_version>
<![CDATA[
<message>
too many normally harmless exit(s)
</message>
]]>

= two repairs for me.
----------------------------------------

----------------------------------------
[Edit 1 times, last edit by Mathilde2006 at Sep 16, 2010 4:14:11 PM]
[Sep 16, 2010 4:13:47 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

[snip]
Of the 17 work units downloaded, Norton nuked 6 before I caught it. The problem here is I already have my ProgramData/Boinc directory excluded.
[mo' snip]

As my subscriptions expired, I've been uninstalling NIS/NAV and using microsoft security essentials, windows defender (with Ad-Aware now & then) and the built-in firewall, instead. (ClamAV and iptables in fedora.)

NAV kept wanting to delete stuff (e.g. an MD5 hash generator compiled from this public domain source) that was in subdirs I had told it to ignore, and even wrecked an ISO file that came with my Cisco trainer when it quarantined a program to reset router/switch passwords from inside the ISO and when I told it to put the program back it corrupted the image... I reported the problems to symantec and they wouldn't do anything about it, so I finally just gave up on them.
straight face
[Sep 16, 2010 7:20:02 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

The hard disk activity from CEP2 is enormous, I've had several machines crash from it. I do not recommend running more than 4 WU's concurrently and even that can grind your rig to a crawl if BOINC is installed on your mechanical OS drive.
[Sep 16, 2010 7:29:07 PM]   Link   Report threatening or abusive post: please login first  Go to top 
X-Files 27
Senior Cruncher
Canada
Joined: May 21, 2007
Post Count: 391
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

I do not recommend running more than 4 WU's concurrently and even that can grind your rig to a crawl if BOINC is installed on your mechanical OS drive.

Or get a performance drive. At least SATA 7200rpm. 10000rpm or 15000rpm is better. Also RAID-0 will help.
----------------------------------------

[Sep 16, 2010 7:52:54 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

Anyone else experiencing this problem:

9/16/2010 2:48:24 PM World Community Grid Started upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4
9/16/2010 2:49:08 PM World Community Grid Started upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4
9/16/2010 2:50:31 PM Project communication failed: attempting access to reference site
9/16/2010 2:50:31 PM World Community Grid Temporarily failed upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4: HTTP error
9/16/2010 2:50:31 PM World Community Grid Backing off 3 hr 11 min 44 sec on upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4
9/16/2010 2:50:32 PM Internet access OK - project servers may be temporarily down.
9/16/2010 2:52:08 PM Project communication failed: attempting access to reference site
9/16/2010 2:52:08 PM World Community Grid Temporarily failed upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4: HTTP error
9/16/2010 2:52:08 PM World Community Grid Backing off 3 hr 46 min 54 sec on upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4
9/16/2010 2:52:10 PM Internet access OK - project servers may be temporarily down.
[Sep 16, 2010 7:55:31 PM]   Link   Report threatening or abusive post: please login first  Go to top 
codes
Advanced Cruncher
Joined: Oct 20, 2009
Post Count: 142
Status: Offline
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

9/16/2010 2:52:10 PM Internet access OK - project servers may be temporarily down.

I had that problem yesterday evening at about 8:30 PM EST, but by 9:00 PM EST the server was back up. Must be a Harvard thing.
[Sep 16, 2010 8:04:35 PM]   Link   Report threatening or abusive post: please login first  Go to top 
JSYKES
Senior Cruncher
Joined: Apr 28, 2007
Post Count: 200
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

I have 7 WU's with 5 run through by now - not without mishap - found the system had frozen sometime during the night - very annoying - restarted (having noted %tage progress across all WU's) and found that there was a major reset - not just with Betas but also HFCC (98%) - 4 WU's restarted at 0% (including the HFCC) but retained elapsed time. Got back tonight to find that 2 beta WU's were still crunching at 5+ hrs elapsed (and about the same still to go) and only 58/59% - found that they reported at 60% not long after. Last 2 WU's are underway at the moment - 2hrs down and only 18% complete...... 1.3hrs and 11% complete - it will be interesting to see how these two work out.....I haven't noticed any excessive HD activity but it is SATA and loads of free space and there is 12Gb RAM too, so plenty of slack.
----------------------------------------

[Sep 16, 2010 8:05:38 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Dataman
Ace Cruncher
Joined: Nov 16, 2004
Post Count: 4865
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: CEP2 beta for windows - Version 6.25

Anyone else experiencing this problem:

9/16/2010 2:48:24 PM World Community Grid Started upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4
9/16/2010 2:49:08 PM World Community Grid Started upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4
9/16/2010 2:50:31 PM Project communication failed: attempting access to reference site
9/16/2010 2:50:31 PM World Community Grid Temporarily failed upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4: HTTP error
9/16/2010 2:50:31 PM World Community Grid Backing off 3 hr 11 min 44 sec on upload of BETA_E200362_346_A.24.C18H13N3S2Si.9.3.set1d06_1_4
9/16/2010 2:50:32 PM Internet access OK - project servers may be temporarily down.
9/16/2010 2:52:08 PM Project communication failed: attempting access to reference site
9/16/2010 2:52:08 PM World Community Grid Temporarily failed upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4: HTTP error
9/16/2010 2:52:08 PM World Community Grid Backing off 3 hr 46 min 54 sec on upload of BETA_E200362_349_A.24.C18H13N3S2Si.90.1.set1d06_0_4
9/16/2010 2:52:10 PM Internet access OK - project servers may be temporarily down.

No, I am uploading one right now. If it is still happening, go to transfers and manually try to upload it.
----------------------------------------


[Sep 16, 2010 8:06:08 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Posts: 311   Pages: 32   [ Previous Page | 8 9 10 11 12 13 14 15 16 17 | Next Page ]
[ Jump to Last Post ]
Post new Thread