Index  | Recent Threads  | Unanswered Threads  | Who's Active  | Guidelines  | Search
 

Quick Go »
No member browsing this thread
Thread Status: Active
Total posts in this thread: 15
Posts: 15   Pages: 2   [ 1 2 | Next Page ]
[ Jump to Last Post ]
Post new Thread
Author
Previous Thread This topic has been viewed 2581 times and has 14 replies Next Thread
S_MDC_PROJECT
Cruncher
Joined: Feb 17, 2005
Post Count: 16
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Why do I only ever get one project work

Hi
why is it that I only ever get one projects work units never a selection of work - to get a selection I have to baby sit the computers and switch on and off projects - thought crunching for WCG was about multiple project work but it seems if you select many projects you only ever get work units from one WHY?
[Dec 6, 2014 9:51:49 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Falconet
Master Cruncher
Portugal
Joined: Mar 9, 2009
Post Count: 3315
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

Which projects do you have selected?
Can you post the event log from the BOINC Manager?
----------------------------------------


- AMD Ryzen 5 1600AF 6C/12T 3.2 GHz - 85W
- AMD Ryzen 5 2500U 4C/8T 2.0 GHz - 28W
- AMD Ryzen 7 7730U 8C/16T 3.0 GHz
[Dec 6, 2014 10:08:59 PM]   Link   Report threatening or abusive post: please login first  Go to top 
noderaser
Senior Cruncher
United States
Joined: Jun 6, 2006
Post Count: 297
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

In addition to your preferences, they have different weights assigned to them by the WCG techs based on the rate at which work can be sustained, and other factors. Sekerob has this shown on his charts. Also, there may just not be work available for the other apps you've selected at any given time; generally you will have a message in your BOINC manager log telling you the reason(s) you're not getting work for a project or subproject.

http://bit.ly/WCGPI1
----------------------------------------
[Dec 7, 2014 2:25:25 AM]   Link   Report threatening or abusive post: please login first  Go to top 
S_MDC_PROJECT
Cruncher
Joined: Feb 17, 2005
Post Count: 16
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

WCG are too controlling with the issue of work units its been three days now and none of my systems have received work units for only one project - need to look for another worthwhile project for some system
[Dec 9, 2014 12:07:11 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

Which projects do you have selected?
Can you post the event log from the BOINC Manager?

You were asked to provide the above, you did not, how do you expect us to help you if you do not provide the requested info?
[Dec 9, 2014 12:30:26 PM]   Link   Report threatening or abusive post: please login first  Go to top 
jonnieb-uk
Ace Cruncher
England
Joined: Nov 30, 2011
Post Count: 6105
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

Sekerob has this shown on his charts.


----------------------------------------

To Join follow this link: Join the UK Team All Welcome! UK Team thread
[Dec 9, 2014 12:34:58 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Falconet
Master Cruncher
Portugal
Joined: Mar 9, 2009
Post Count: 3315
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

If you selected only the OET1 project, chances are you won't be getting a lot of work. This project is still not fully launched and work is very limited.
----------------------------------------


- AMD Ryzen 5 1600AF 6C/12T 3.2 GHz - 85W
- AMD Ryzen 5 2500U 4C/8T 2.0 GHz - 28W
- AMD Ryzen 7 7730U 8C/16T 3.0 GHz
[Dec 9, 2014 12:55:10 PM]   Link   Report threatening or abusive post: please login first  Go to top 
Former Member
Cruncher
Joined: May 22, 2018
Post Count: 0
Status: Offline
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

S_MDC_PROJECT,

It's very technical why the distribution balance can never be even [low supply or bandwidth/storage limitations to mention a few], but if you select your favorite projects, and the 'If there is no work for... sent me something else available', you will get a nice assortment, I do. Yesterday on one dual core device with zero buffer setting, intentionally, had FA@H, MCM1, OET1, FAHV and UGM1. CEP2 I've not selected, in fact, set the allowed disk use to below 2.5GB to prevent them from being sent.

7.35 mcm1 MCM1_0009718_1057_1 08:38:16 (08:34:34) 12/9/2014 10:56:36 AM 12/9/2014 10:57:04 AM 99,29 Reported: OK + 3022763 49.88 MB 87.82 MB
7.19 faah faah939329_ZINC00283516_x2vg5RTKNUC_00_0 05:02:48 (04:54:18) 12/9/2014 6:58:18 AM 12/9/2014 7:02:18 AM 97,19 Reported: OK 3022763 77.35 MB 123.36 MB
7.35 mcm1 MCM1_0009710_9102_0 08:36:23 (08:31:37) 12/9/2014 2:18:21 AM 12/9/2014 2:18:56 AM 99,08 Reported: OK + 3022763 42.03 MB 87.86 MB
7.19 faah faah939273_ZINC00844400_x2vg5RTKNUC_00_0 06:18:44 (06:15:40) 12/9/2014 1:55:13 AM 12/9/2014 1:54:54 AM 99,19 Reported: OK + 3022763 73.67 MB 114.21 MB
7.35 mcm1 MCM1_0009704_4948_1 08:40:29 (08:36:21) 12/8/2014 7:36:21 PM 12/8/2014 7:36:30 PM 99,21 Reported: OK + 3022763 42.69 MB 87.87 MB
7.08 oet1 OET1_0000091_xZAGP_1016_0 05:02:52 (05:01:15) 12/8/2014 5:42:00 PM 12/8/2014 5:40:45 PM 99,47 Reported: OK + 3022763 45.77 MB 44.35 MB
7.32 fahv FAHV_x3OTS-AS_0885265_1987_0 01:43:48 (01:42:48) 12/8/2014 12:39:04 PM 12/8/2014 12:39:23 PM 99,04 Reported: OK + 3022763 38.81 MB 37.32 MB
7.08 oet1 OET1_0000071_xEBGP_1912_0 05:14:21 (05:03:31) 12/8/2014 3:29:33 AM 12/8/2014 3:30:26 AM 96,55 Reported: OK + 3022763 45.94 MB 44.46 MB

Now and then technicians go into the feeder matrix to set how many slots each science gets allocated to re-balance, where in the long run one would get quasi even runtime for the various. If there are many volunteers though who set exclusive sciences like on the low availability UGM1+OET1 that suck their slots allocations empty all the time, there's very little left for those that choose a wider selection, so they would predominantly get MCM1 and FA@H.

In a nutshell.

BTW, this snip sentence reads contradictory "none of my systems have received work units for only one project." Says something like your systems are getting work for multiple rsearches? That will be the case if there's a situation where the particular science slots are empty at the moment of request _And_ have the "If there is no work for...sent me something else available". At any rate, my dual is getting a selection of random work, whatever is available in whichever slot (there's 3000 or so getting refilled based on those feeder matrix weightings). Taking OET1, there's only 1 work unit available of this flavor per 4 seconds, when there are 48 requests for a work unit in that time period. The statistics make it then very low chance to get the low priority fed work units [not to drain the pool in the first 30 minutes of the day].

OET1 is special. It would have been wider circulated, but a substantial technical issue cropped up for the "flex" workunits, of which there is an abundance in the library. We'll have wait until they pass beta testing, no word if alpha is making any progress. Till then only the "rigid", but there's only about 20 thousand a day. That's only 29 minutes work distribution on 1 million per day.
UGM1 will be low priority for all the time, is the indication. The work units are too big in bandwidth and storage. Would they be allowed a bigger quota, it would put the whole grid in jeopardy, a continuous stream of 'Server load too high, backing off 3600 seconds'. Can't have that of course.
CEP2 If you got 2.5GB storage per task and 1GB of RAM, you can opt in, they are in fact highest feeder priority if selected. Trying and trying, there's never more volunteers to do 25-30Kwork iunits a day.
[Dec 9, 2014 1:05:32 PM]   Link   Report threatening or abusive post: please login first  Go to top 
S_MDC_PROJECT
Cruncher
Joined: Feb 17, 2005
Post Count: 16
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

Hi
firstly my health prevents me from baby sitting the systems so my apologies for not getting back to you sooner
1/ Projects I have marked for WUs - are OET/UGM and MCM
2/ in last 5 days only received the following WUs 3 UGM - 0 OET and a torrential down pouring of MCM
3/ 3 systems running WCG are Dual XEON Quad core processor (output each of 25Ghz combined 75Ghz) with an allocated 10 Gb hard drive space per DC CPU also they do no other work other than DC crunching - so they are capable
As WGC are not being fair in the issue of WUs two of the systems have been moved over to F@H and the third will be moved later today
my contribution to WGC is obvious I have given quite a bit of power/time and money to helping WCG but enough is enough
Kindest regards
[Dec 15, 2014 10:29:35 AM]   Link   Report threatening or abusive post: please login first  Go to top 
S_MDC_PROJECT
Cruncher
Joined: Feb 17, 2005
Post Count: 16
Status: Offline
Project Badges:
Reply to this Post  Reply with Quote 
Re: Why do I only ever get one project work

I forgot to add no band width problems - I have high speed fibre broadband 75 down and 20 up
[Dec 15, 2014 10:34:35 AM]   Link   Report threatening or abusive post: please login first  Go to top 
Posts: 15   Pages: 2   [ 1 2 | Next Page ]
[ Jump to Last Post ]
Post new Thread