***Hi everyone! I want to welcome you all to my class this afternoon! I'm editing my original class prep work post so that you can have all of the directions together in one place.
Check in and let me know you're here, and then you can read through the misting I've done if you haven't had a chance to see it yet!!!!***
I wanted to start with a few instructions ahead of time, in case anyone wants to work along with the class as we go. Most of my layouts have some Glimmer Mist on them, and that takes a bit of drying time, so here is what I did with my diecuts and doilies before I ever started making layouts.
I started with this doily from Basic Grey

which I LOVE! They have this in brown too and it's as beautiful as the white! But I have to be honest with you, when I purchase a paper that looks like this, I always want to get a little more bang for my buck! You just can't get that after it's already made into a layout,but you can certainly use it to make a creative background for another layout. This is how I go about doing that.
Take the doily, turn it over, so that the back side is up, line it up over a white sheet of paper and mist it with either this

If you use this one, make sure and keep your misting hand about 18-24" from the papers so you don't get too dark of a coverage.
Or you can use this

which I like better...it's a lot lighter and won't overpower the background sheet you're trying to make. I used a little of both, to get a background that looks like this:

and I have to apologize, I created most of these projects when it was raining outside or too dark to get great photos, so you may not get the full look at the paper until it's in a layout. This is the worst of that issue...I just forgot to take a photo until the layers were added.
Another way that you could get this masked effect, is if you used a pigment ink pad to do it. It will take a lot more work than the mists and you need to be careful not to drag the inkpad over the doily so that you don't pull at the design. You will be using the entire front side of the doily on our projects, so be careful not to destroy it in this process.