Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
![]() |
World Community Grid Forums
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
No member browsing this thread |
Thread Status: Active Total posts in this thread: 21
|
![]() |
Author |
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
I just finished a 67 hour work unit crunch and was sent a new work unit. Since then I have had 4 resets in the last 8 hours. The units seem to upload after about 1% to 2% then download the same work unit or a fresh one. I completed 4 days 17 hours crunching without a problem now things seem to have gone haywire. I usuall leave a connection to the internet open, although I had to reboot this morning and forgot to re initialize an internet connection and a large work unit completed and was unable to upload the results. I started a connection and was able to upload it successfully but i have had problems ever since. Does anyone have a solution short or re-installing the program Update to my own post Monday 22nd 12:02 pm It has now been 21 hours since I completed my last successful work unit I am trying to give WCG the benefit of the doubt as to a serious problems being encountered by numerous users of this initative Quote [21 Hours Wasted] Sort this problem out soon or participants will start falling like flies I am sure I speak for everyone when I say you are stifling our enthusiasm towards this project and a genuine opportunity to contribute to a very worthwhile cause will be eroded significantly Quote:[If what is said is not what is meant Then that which should be done is left undone If left undone morals and justice will go awry And the people will stand around in helpless confusion] Sort out this confusion soon or it may be to your peril |
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
|
||
|
gdlxn
Cruncher Joined: Nov 16, 2004 Post Count: 24 Status: Offline Project Badges: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I am also having this problem, more than a half a dozen times over the weekend.
![]() |
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Same problem... I am running the software on three systems. Two of the systems finished their first protein, and after that they are doing this reset usually below 3%. The third machine I have set to run for only half the day because its a server, and its not finished its first protein yet but its still going fine (its at 80%). I am going to stop running the two that are resetting until there is a fix for this. I am guessing my third one will probably do the same thing once its done.
|
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
I've been running this for 2 days and the sofware keeps returning back to the beginning and the % goes down. The CPU time is nor counting correctly either as the software has had a least 30 hours bit only counts 52 minutes. Maybe I should go back to SETI? Has anyone fixed this problem yet?
|
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Just adding weight.
I am experiencing the exact same problem. |
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
I have to add myself to the list of users whos equipment has stalled out on processing units. After the first unit both of my pc's will only make it to about 2 percent and start over. If I dont see some aknowledgement of a problem soon I'm going to discontinue the use of the software. I have to wonder if this problem is being ignored what issues are about to crop up next.
|
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Same problem here... first 3 work units completed as expected; must have 10 aborts w/o a single completion since. Also, when I posted to another thread, my member info indicated I joined on 11/20 (which is when my last work unit was returned); I actually joined on 11/17 - was something changed on 11/20 that might be causing this problem?
|
||
|
kglasgow
Cruncher Joined: Nov 16, 2004 Post Count: 1 Status: Offline Project Badges: ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
I'm having the same problem as everyone else. Worked for two results and then will not complete a task. I sure hope some at WCG is paying attention; it would be nice if they'd address this publicly and assure us that they're working on a solution. I'm getting cranky.
![]() |
||
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
You may want to check out this post. They seem to be addressing the problem:
http://www.worldcommunitygrid.org/forums/wcg/viewthread?thread=590 |
||
|
|
![]() |