Sounds like a bad build of the WU. The techs should catch this and, if appropriate, will re-build it and either throw it back into the mix or run it in-house. It's certainly not something to worry about.

I just received one of those -->download failed. MIP1_ 00219567_ 3865_ 4--
I looked at the results status and everyone else failed for the same reason, except one "Detached". All of the errored out ones say:
<message>
WU download error: couldn't get input files:
<file_xfer_error>
<file_name>mip1.MIP1_00219567.1</file_name>
<error_code>-119 (md5 checksum failed for file)</error_code>
<error_message>MD5 check failed</error_message>
</file_xfer_error>
</message>

File mip1.MIP1_00274392.2 error'd out for several people around the following times:

2/6/2020 @ 20:43 - 20:52 UTC (2:43 - 2:52 PM CST)

Later people who retrieved the file were able to download it successfully. I'm thinking there was a brief hiccup around this time.

Can a tech please investigate why we're getting -119 download failures?

I'm seeing several members failing on the same work units with the same -119 error message. I find it hard to believe it's something related to my equipment. I was not getting these errors at all on SCC before work ran out.

Four -119 failures today - #4 is me.
MIP1_ 00296857_ 1518_ 4
<core_client_version>7.14.3</core_client_version>
<![CDATA[
<message>
WU download error: couldn't get input files:
<file_xfer_error>
<file_name>mip1.MIP1_00296857.2</file_name>
<error_code>-119 (md5 checksum failed for file)</error_code>
</file_xfer_error>
</message>
]]>

One -119 failure today - only me
MIP1_ 00299059_ 0752_ 0
<core_client_version>7.14.3</core_client_version>
<![CDATA[
<message>
WU download error: couldn't get input files:
<file_xfer_error>
<file_name>mip1.MIP1_00299059.2</file_name>
<error_code>-119 (md5 checksum failed for file)</error_code>
</file_xfer_error>
</message>
]]>