| Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
 |
World Community Grid Forums
Category: Completed Research
Forum: Help Cure Muscular Dystrophy - Phase 2 Forum
Thread: WUs looping under Linux |
| No member browsing this thread |
|
Thread Status: Active Total posts in this thread: 13
|
|
| Author |
|
|
JmBoullier
Former Community Advisor Normandy - France Joined: Jan 26, 2007 Post Count: 3715 Status: Offline Project Badges: 
|
my 13 "looping" WUs have finally passed their "blocking" positions and completed. In fact only 11 have finished. There are still two running but I am hopeful.  One is still on its first blocking position at 8.176 % after 3:40 hours. The other one is chewing its second wall at 37.735 % after 8:05 hours (the first one was at 8.805 % and took more than 4 hours)! I only hope that my wingmen are not P3s... Jean.  |
||
|
|
JmBoullier
Former Community Advisor Normandy - France Joined: Jan 26, 2007 Post Count: 3715 Status: Offline Project Badges:
|
So far none of these apparently looping WUs has been really looping, they only look like they are.
----------------------------------------If you have no other strong reason to do it do not abort them, they will finish successfully. Good luck. Jean. |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
These WUs seem to run correctly (runtime and TTC changing normally, and CPU at 100 %) but the percentage does not change, no checkpoint is taken and the temperature of the processor is a few degrees below its usual one at 100 % use. Checked the temperature and this is true for my P4 as well. It's running a good 6 degrees below what it would usually be at 100% CPU. (17C above ambient, instead of 23+C.) That's a huge difference. |
||
|
|
|