| Index | Recent Threads | Unanswered Threads | Who's Active | Guidelines | Search |
 |
World Community Grid Forums
Category: Completed Research
Forum: Help Cure Muscular Dystrophy - Phase 2 Forum
Thread: Continual error 193 |
| No member browsing this thread |
|
Thread Status: Active Total posts in this thread: 42
|
|
| Author |
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Just to see if there are ever differences between boinc clients, I have my machines running a variety of versions: 5.8.15, 5.10.45 and 6.2.1. I set my profiles to this project last night. One 5.10.45 machine is running happily, but overnight other 5.10.45 and 5.8.15 machines went through hundreds of WUs, every one of them failing like this:
----------------------------------------<core_client_version>5.10.45</core_client_version> <![CDATA[ <message> process exited with code 193 (0xc1, -63) </message> <stderr_txt> INFO: Initializing Platform. SIGILL: illegal instruction Stack trace (6 frames): [0x80e45e7] [0x8153ea0] [0xb7fec420] [0x8049cb1] [0x8162156] [0x8048131] Exiting... </stderr_txt> ]]> [Edited because I forgot which machines were running which versions. ] [Edit 1 times, last edit by Former Member at May 15, 2009 3:42:55 AM] |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Worse still, I can't give one of those machines any work at all, even for another project!
15-May-2009 13:13:49 [World Community Grid] Scheduler request succeeded: got 0 new tasks 15-May-2009 13:13:49 [World Community Grid] Message from server: No work sent 15-May-2009 13:13:49 [World Community Grid] Message from server: No work is available for Influenza Antiviral Drug Search 15-May-2009 13:13:49 [World Community Grid] Message from server: (reached daily quota of 19 results) |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Hello Kremmen,
I have run 4 HCMD2 work units through BOINC 5.10.45 on Windows XP. I suggest you start by rebooting and select other projects. It will take a while to rebuild a larger daily download by returning valid results. Lawrence |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
I have run 4 HCMD2 work units through BOINC 5.10.45 on Windows XP. I suggest you start by rebooting and select other projects. It will take a while to rebuild a larger daily download by returning valid results. Just checked again. I've had success on 5.10.45 too. (Thought that machine was on 6.2.1, but it's not.) However, mine are all linux. Rebooting is irrelevant. Restarting boinc makes no difference. The two 5.10.45 machines are running the same OS version, same kernel (2.6). Only difference is that the failing one is a P3, while the working one is a P4. [Edit 1 times, last edit by Former Member at May 15, 2009 3:48:09 AM] |
||
|
|
uplinger
Former World Community Grid Tech Joined: May 23, 2005 Post Count: 3952 Status: Offline Project Badges: 
|
I have run 4 HCMD2 work units through BOINC 5.10.45 on Windows XP. I suggest you start by rebooting and select other projects. It will take a while to rebuild a larger daily download by returning valid results. Just checked again. I've had success on 5.10.45 too. (Thought that machine was on 6.2.1, but it's not.) However, mine are all linux. Rebooting is irrelevant. Restarting boinc makes no difference. The two 5.10.45 machines are running the same OS version, same kernel (2.6). Only difference is that the failing one is a P3, while the working one is a P4. Greetings, I have some celeron and P3 machines that are erroring out with Signal 4 in the logs on linux as well. I am going to increase the priority of this issue as it was not seen during beta. Initial thoughts are the optimizations used when compiling use an operation that is not supported on these machines. -Uplinger |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
I am going to increase the priority of this issue as it was not seen during beta. Initial thoughts are the optimizations used when compiling use an operation that is not supported on these machines. That would be my thought too. When will affected machines be able to get work again? i.e. When does the daily quota reset? Midnight UTC? |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
"Illegal instruction" error occurs on the best of the tualatin P3 chips, the Pentium III-S 1.4.
I'm getting "process got signal 4" errors on an Athlon. I'd guess from that that it is failing for all P3 and Athlon class machines. |
||
|
|
Sekerob
Ace Cruncher Joined: Jul 24, 2005 Post Count: 20043 Status: Offline |
I am going to increase the priority of this issue as it was not seen during beta. Initial thoughts are the optimizations used when compiling use an operation that is not supported on these machines. That would be my thought too. When will affected machines be able to get work again? i.e. When does the daily quota reset? Midnight UTC? Daily limits usually reset at 0:00 UTC.
WCG
----------------------------------------Please help to make the Forums an enjoyable experience for All! [Edit 1 times, last edit by Sekerob at May 15, 2009 7:03:06 AM] |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Daily limits usually reset at 0:00 UTC. Thanks. That appeared likely. The error message above occurred 49 mins into the UTC day, so that computer will be having a holiday from WCG today. |
||
|
|
Former Member
Cruncher Joined: May 22, 2018 Post Count: 0 Status: Offline |
Only difference is that the failing one is a P3, while the working one is a P4. I was neither able to successfully crunch HCMD2 on a P3 (OS is Debian Lenny):
|
||
|
|
|