Page 1 of 1

version 4.0.1 not showing all thumbnails

Posted: 30 Jul 2013, 12:34
by purpur
For some odd reason the gallery does not show ALL of the thumbnails, nor does it show loaded thumbnails consistently. On each page load loaded / shown thumbnails vary.



It appears the gallery refers to

Code: Select all

/media/com_phocagallery/images/phoca_thumb_s_no_image.png

for some (random) pictures.

The problem has occured before in alpha, but it has not been solved.

By cache settings I assume you refer to Joomla Global Configuration settings (System settings). In those settings caching is disabled for my site.

Post edit:
It seems the problem is related to the "Category View" setting of "Different thumbnail height". I had it set to "Yes (Masonry Effect)", and when I change it to "No" thumbnails load and show normally. I tested changing the setting to "Yes", and that also causes problems, which are a bit different. So, by changing the setting of different thumbnail size to "No" all thumbnails are shown ok. Perhaps Masonry Effect requires some additional work?

Re: version 4.0.1 not showing all thumbnails

Posted: 30 Jul 2013, 14:28
by Jan
Hi, it seems, like the additional images are missing for you, just enable all the required parameters to create them, see:

https://www.phoca.cz/documents/2-phoca-g ... parameters
Jan

Re: version 4.0.1 not showing all thumbnails

Posted: 01 Aug 2013, 14:38
by purpur
Thank you for your swift reply.

Indeed, enabling the "Additional thumbnails" in thumbnail -tab did solve my problems. The problem was "too dumb user" and has been solved with your assistance.

:twisted:

Re: version 4.0.1 not showing all thumbnails

Posted: 05 Aug 2013, 13:51
by Jan
Ok