chipboard
Posted: Mon Aug 11, 2008 8:06 pm
just wondering what everyone uses to adhere chipboard the best. i'm using a tape runner but sometimes the items don't seem to stick well enough. let me know. thanks
ACOT Message Board
https://www.acherryontop.com/forum/
chipboard
https://www.acherryontop.com/forum/viewtopic.php?f=5&t=193947
Page 1 of 2
Re: chipboard
Posted: Mon Aug 11, 2008 8:10 pm
I like to use the glue dots. Those work really well for me.
Re: chipboard
Posted: Mon Aug 11, 2008 8:15 pm
I like using the GLUE PEN. It seems to hold it down better than anything else I've used.
Re: chipboard
Posted: Mon Aug 11, 2008 8:19 pm
I either use glue dots or run it thru the xyron machine. It's also really good for stuff that is really skinny!
Re: chipboard
Posted: Mon Aug 11, 2008 8:31 pm
I like the tombow or my xyron.
Re: chipboard
Posted: Mon Aug 11, 2008 8:36 pm
The ATG holds everything!
Re: chipboard
Posted: Mon Aug 11, 2008 9:33 pm
I use tacky glue.
Re: chipboard
Posted: Mon Aug 11, 2008 10:51 pm
I like to use liquid glue... currently stuck on Scotch. Glue that is... 
Re: chipboard
Posted: Mon Aug 11, 2008 11:20 pm
I also use glue dots (the mini ones) or my Xyron "X" (if I want it to be somewhat quick)
Re: chipboard
Posted: Tue Aug 12, 2008 1:06 am
mini glue dots for me
Re: chipboard
Posted: Tue Aug 12, 2008 2:10 am
I use the ATG as well...that thing really does hold everything down!
Re: chipboard
Posted: Tue Aug 12, 2008 6:06 am
Tombo, the one with the green lid. It sticks anything!
Re: chipboard
Posted: Tue Aug 12, 2008 10:22 am
Glue dots work well for me....
Re: chipboard
Posted: Tue Aug 12, 2008 12:58 pm
I've been trying to go through old layouts and journal on the ones that I never did. I'm amazed at how poorly some of the chipboard adhered. Most of it was the self-adhesive kind. 
The chipboard I glued down with my glue dots or tombo still were good. 
Good luck!
The chipboard I glued down with my glue dots or tombo still were good. Good luck!Re: chipboard
Posted: Tue Aug 12, 2008 1:40 pm
Scrappy Glue
Re: chipboard
Posted: Tue Aug 12, 2008 4:07 pm
I use my xyron machine.
Re: chipboard
Posted: Tue Aug 12, 2008 6:38 pm
Glue dots and Liquid glue for me.
Re: chipboard
Posted: Sun Sep 07, 2008 10:30 pm
i use fabri-tac on everything, it sets up pretty fast & it dries clear & it wont come loose. i get it at our local scrap store but u can get it in the craft section at wal mart. good luck.
Re: chipboard
Posted: Sun Sep 07, 2008 10:33 pm
definitely glue here 
Re: chipboard
Posted: Sun Sep 07, 2008 10:34 pm
When I'm covering the chipboard with paper, I use a glue stick and body heat...sit on it for a few minutes to get it to stick realllllllly well!