Christmas Card Crop Class HERE
Posted: Sat Oct 15, 2011 5:10 pm
[highlight=#NaNNaNNaN][highlight=#NaNNaNNaN]I love making cards! LOL - I have no idea when things changed from me saying that I don't enjoy making them, am not any good at it, and only do it because I 'have' to, but now I really do like it! I love it that I can make a card in a short amount of time, which allows me to fit something creative into my day even when I am busy. I also enjoy giving handmade cards. I know that some people don't appreciate them, but I find that most people really do![/highlight]
[highlight=#NaNNaNNaN]Since the creative aspect is something that I love, I tend to make every card unique, but with Christmas cards that can be hard because often you need lots. So, I have attempted here to give you some simple 'recipes' so that you can make your cards quickly, but you can also put your own spin on them if you like. If you don't want to put your own spin on them, you can follow pretty much exactly what I did and have a great set of cards, with stuff leftover to make more (although you will have to vary the chipboard pieces that you use)[/highlight]
[highlight=#NaNNaNNaN]The very basic recipe that I used for these cards is - cardstock card, stamped or sticker sentiment, chipboard for dimension, twine for 'softness' and some patterned paper for interest.[/highlight]
[highlight=#NaNNaNNaN]Ok, so enough with talking, let's get into it![/highlight]
[highlight=#NaNNaNNaN]You can get the supply list HERE.[/highlight]
[highlight=#NaNNaNNaN]And if you need any help just shout, I will be around for a while now, and throughout the crop, or send me a PM.[/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN]First you need to make the cards. I used one sheet each of the Quick Sand, Rain and Hillary Bazzill Cardstock. Kraft would be a good substitute for the quick sand, or really you could make them all from kraft if you want. Here is how I cut my cardstock to get both of the 4.25x5.5 cards and have the largest possible scraps. That is one cut at 8.5, to get the large 12inch long scrap. Then cut the other way at 5.5, and 11.[/highlight]
[highlight=#NaNNaNNaN]After you fold, you will have this.[/highlight]
[highlight=#NaNNaNNaN]Using that large scrap of the tan, stamp your tree stamp three times, leaving a little room in between each.[/highlight]
[highlight=#NaNNaNNaN]Cut them apart and mat them. I used the brown patterned paper and the scrap of blue cardstock. I also inked the edges of EVERYTHING with brown ink. So, here you can see that the edges of the stamped papers are inked, and the edges of the mats. From now on, just assume that everything is inked before being glued down.[/highlight]
[highlight=#NaNNaNNaN]Next, I laid out my 3 stamped images on the respective cards, along with a piece of chipboard for each. This is my 'planning'. They are just sitting there.[/highlight]
[highlight=#NaNNaNNaN]Starting with the tan card, I cut a piece of patterned paper, and another mat from a second sheet of the tan paper, before gluing as shown. I added some bling to the chipboard just for that extra something.[/highlight]
[highlight=#NaNNaNNaN]This next one is a little more complicated. I wanted to use the lovely blue border, but since my card is smaller than the paper, I had to cut it down. I settled on cutting the top and bottom off, and trimming both sides equally to create borders on the side of my card. I don't have dimensions for you, because decide where to cut by laying the paper on the card and marking with a pencil the spot where the cut should be made.[/highlight]
[highlight=#NaNNaNNaN]On this one I added some twine. I just wrapped it around the card a few times and tied a bow. Then the sentiment and the chipboard are set with foam tape to keep it above the twine. The twine isn't glued down, that way I can sort of slide the bow into the exact place that I want it. I may have used a glue dot on the bow once I was sure it was perfect, but most of the time I don't bother.[/highlight]
[highlight=#NaNNaNNaN]On this next one we will do a little more clever cutting to preserve the border part of the paper. (sorry for the ugly color of green, the color is off in this photo, the actual green colors are much prettier)[/highlight]
[highlight=#NaNNaNNaN]I cut the paper about an inch above the bottom of the card. Then I glued the two halves together so that it is just the right size for the card front. See how the scrap on the right side has a crooked cut line? That is because I cut it off with scissors after it was glued together. I put the glue on the bottom of the top piece, glued it to what will be the bottom piece, then trimmed the excess from the back. (the paper is not glued to the card yet)[/highlight]
[highlight=#NaNNaNNaN]Now we need to cover up that seam. I cut the longest strip from the sideways blocked paper.[/highlight]
[highlight=#NaNNaNNaN]After inking the edges, matting and assembling... (I wrapped the ends of the paper strip around onto the back. You can cut them off, but I liked them wrapped on this card.) the darker brown cardstock that the green paper is matted on, is bazzill bark.[/highlight]
[highlight=#NaNNaNNaN]This next set of cards I decided to use sentiment stickers for something different. If you don't like stamping, these are a perfect solution! Here is my planning stage. For the circle sentiment, I measured the sentiment before using my circle cutter to cut a circle almost the exact same size, from the pale patterned paper. Then I carefully stuck the sentiment so that it is centered on the circle. If you place the sticker crooked, undu works great! Or sometimes if it's just a little off, I will use my scissors and the line around the edge of the sticker as a guide to trim the excess off. Don't try to cut right on the edge line, instead cut like a tiny bit outside the line, so you have a thin 'white' border.[/highlight]
[highlight=#NaNNaNNaN]hehe - see the barcode on the brown card? make sure you cut that off before you start doing the cutting to make your cards.
[/highlight]
[highlight=#NaNNaNNaN]Here is a little more creative cutting. Remember that strip that we cut out of the paper for the previous card? Couldnt let those two large scraps go to waste. so I pieced them back together like this, but wait, don't glue...[/highlight]
[highlight=#NaNNaNNaN]I didn't want the seam to show, and I wanted a plain color to ground the middle of the card for the sentiment, so I added this wide red strip, then I cut the little triangle from where the top paper shows in the bottom left corner. Make sure your red strip is wide enough though, when I cut that bottom triangle off, I realized that there was a little hole there, because the bottom paper is at an angle. Luckily my strip was just wide enough.[/highlight]
[highlight=#NaNNaNNaN]Here is the final card, all inked and assembled.[/highlight]
[highlight=#NaNNaNNaN]This one is easy, put the sentiment sticker on a scrap of the tan cardstock and trim. Mat the brown paper on more tan cardstock, using your pencil to mark where to cut.[/highlight]
[highlight=#NaNNaNNaN]Ink and assemble - with a touch of blue on the sentiment mat and as a punched border at the bottom.[/highlight]
[highlight=#NaNNaNNaN]Last one! (Ew, I got terrible colors in the photo again - sorry) Cut some tan cardstock, and then the red paper to mat each other as shown. Use your corner rounder on all the edges. (This photo shows the brown paper not rounded, but I did end up rounding those edges.)[/highlight]
[highlight=#NaNNaNNaN]Align the sentiment sticker centered at the bottom of the red paper.[/highlight]
[highlight=#NaNNaNNaN]Cover the top part of the red paper with the white string paper. Then add the chipboard embellishments, a little bling and twine as shown.[/highlight]
[highlight=#NaNNaNNaN]Here is the group of cards all together[/highlight]
[highlight=#NaNNaNNaN]Here are the bonus card ideas:[/highlight]
[highlight=#NaNNaNNaN]Click on either of those images above to see the gallery entry with all of the cards up close.[/highlight]
[highlight=#NaNNaNNaN][/highlight]
[/highlight][highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN]Since the creative aspect is something that I love, I tend to make every card unique, but with Christmas cards that can be hard because often you need lots. So, I have attempted here to give you some simple 'recipes' so that you can make your cards quickly, but you can also put your own spin on them if you like. If you don't want to put your own spin on them, you can follow pretty much exactly what I did and have a great set of cards, with stuff leftover to make more (although you will have to vary the chipboard pieces that you use)[/highlight]
[highlight=#NaNNaNNaN]The very basic recipe that I used for these cards is - cardstock card, stamped or sticker sentiment, chipboard for dimension, twine for 'softness' and some patterned paper for interest.[/highlight]
[highlight=#NaNNaNNaN]Ok, so enough with talking, let's get into it![/highlight]
[highlight=#NaNNaNNaN]You can get the supply list HERE.[/highlight]
[highlight=#NaNNaNNaN]And if you need any help just shout, I will be around for a while now, and throughout the crop, or send me a PM.[/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN][/highlight]
[highlight=#NaNNaNNaN]First you need to make the cards. I used one sheet each of the Quick Sand, Rain and Hillary Bazzill Cardstock. Kraft would be a good substitute for the quick sand, or really you could make them all from kraft if you want. Here is how I cut my cardstock to get both of the 4.25x5.5 cards and have the largest possible scraps. That is one cut at 8.5, to get the large 12inch long scrap. Then cut the other way at 5.5, and 11.[/highlight]
[highlight=#NaNNaNNaN]After you fold, you will have this.[/highlight]
[highlight=#NaNNaNNaN]Using that large scrap of the tan, stamp your tree stamp three times, leaving a little room in between each.[/highlight]
[highlight=#NaNNaNNaN]Cut them apart and mat them. I used the brown patterned paper and the scrap of blue cardstock. I also inked the edges of EVERYTHING with brown ink. So, here you can see that the edges of the stamped papers are inked, and the edges of the mats. From now on, just assume that everything is inked before being glued down.[/highlight]
[highlight=#NaNNaNNaN]Next, I laid out my 3 stamped images on the respective cards, along with a piece of chipboard for each. This is my 'planning'. They are just sitting there.[/highlight]
[highlight=#NaNNaNNaN]Starting with the tan card, I cut a piece of patterned paper, and another mat from a second sheet of the tan paper, before gluing as shown. I added some bling to the chipboard just for that extra something.[/highlight]
[highlight=#NaNNaNNaN]This next one is a little more complicated. I wanted to use the lovely blue border, but since my card is smaller than the paper, I had to cut it down. I settled on cutting the top and bottom off, and trimming both sides equally to create borders on the side of my card. I don't have dimensions for you, because decide where to cut by laying the paper on the card and marking with a pencil the spot where the cut should be made.[/highlight]
[highlight=#NaNNaNNaN]On this one I added some twine. I just wrapped it around the card a few times and tied a bow. Then the sentiment and the chipboard are set with foam tape to keep it above the twine. The twine isn't glued down, that way I can sort of slide the bow into the exact place that I want it. I may have used a glue dot on the bow once I was sure it was perfect, but most of the time I don't bother.[/highlight]
[highlight=#NaNNaNNaN]On this next one we will do a little more clever cutting to preserve the border part of the paper. (sorry for the ugly color of green, the color is off in this photo, the actual green colors are much prettier)[/highlight]
[highlight=#NaNNaNNaN]I cut the paper about an inch above the bottom of the card. Then I glued the two halves together so that it is just the right size for the card front. See how the scrap on the right side has a crooked cut line? That is because I cut it off with scissors after it was glued together. I put the glue on the bottom of the top piece, glued it to what will be the bottom piece, then trimmed the excess from the back. (the paper is not glued to the card yet)[/highlight]
[highlight=#NaNNaNNaN]Now we need to cover up that seam. I cut the longest strip from the sideways blocked paper.[/highlight]
[highlight=#NaNNaNNaN]After inking the edges, matting and assembling... (I wrapped the ends of the paper strip around onto the back. You can cut them off, but I liked them wrapped on this card.) the darker brown cardstock that the green paper is matted on, is bazzill bark.[/highlight]
[highlight=#NaNNaNNaN]This next set of cards I decided to use sentiment stickers for something different. If you don't like stamping, these are a perfect solution! Here is my planning stage. For the circle sentiment, I measured the sentiment before using my circle cutter to cut a circle almost the exact same size, from the pale patterned paper. Then I carefully stuck the sentiment so that it is centered on the circle. If you place the sticker crooked, undu works great! Or sometimes if it's just a little off, I will use my scissors and the line around the edge of the sticker as a guide to trim the excess off. Don't try to cut right on the edge line, instead cut like a tiny bit outside the line, so you have a thin 'white' border.[/highlight]
[highlight=#NaNNaNNaN]hehe - see the barcode on the brown card? make sure you cut that off before you start doing the cutting to make your cards.
[/highlight][highlight=#NaNNaNNaN]Here is a little more creative cutting. Remember that strip that we cut out of the paper for the previous card? Couldnt let those two large scraps go to waste. so I pieced them back together like this, but wait, don't glue...[/highlight]
[highlight=#NaNNaNNaN]I didn't want the seam to show, and I wanted a plain color to ground the middle of the card for the sentiment, so I added this wide red strip, then I cut the little triangle from where the top paper shows in the bottom left corner. Make sure your red strip is wide enough though, when I cut that bottom triangle off, I realized that there was a little hole there, because the bottom paper is at an angle. Luckily my strip was just wide enough.[/highlight]
[highlight=#NaNNaNNaN]Here is the final card, all inked and assembled.[/highlight]
[highlight=#NaNNaNNaN]This one is easy, put the sentiment sticker on a scrap of the tan cardstock and trim. Mat the brown paper on more tan cardstock, using your pencil to mark where to cut.[/highlight]
[highlight=#NaNNaNNaN]Ink and assemble - with a touch of blue on the sentiment mat and as a punched border at the bottom.[/highlight]
[highlight=#NaNNaNNaN]Last one! (Ew, I got terrible colors in the photo again - sorry) Cut some tan cardstock, and then the red paper to mat each other as shown. Use your corner rounder on all the edges. (This photo shows the brown paper not rounded, but I did end up rounding those edges.)[/highlight]
[highlight=#NaNNaNNaN]Align the sentiment sticker centered at the bottom of the red paper.[/highlight]
[highlight=#NaNNaNNaN]Cover the top part of the red paper with the white string paper. Then add the chipboard embellishments, a little bling and twine as shown.[/highlight]
[highlight=#NaNNaNNaN]Here is the group of cards all together[/highlight]
[highlight=#NaNNaNNaN]Here are the bonus card ideas:[/highlight]
[highlight=#NaNNaNNaN]Click on either of those images above to see the gallery entry with all of the cards up close.[/highlight]
[highlight=#NaNNaNNaN][/highlight]
[/highlight][highlight=#NaNNaNNaN][/highlight]
BUt thanks, I love them!!