Please Please helpme
I installed Cacti but it only can see localhost, i want to monitor the bandwidth with a switch 3com 4400 but my operative system (Fedora) cant see the switch and i dont know how configure it.
i have a problem
Moderators: Developers, Moderators
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Moved to general.. 
I hate to say this, but read the documentation.
You need to add a new device and from your questions, you also will need to know if your switch supports snmp and if it is configured as well.
Good luck.
I hate to say this, but read the documentation.
You need to add a new device and from your questions, you also will need to know if your switch supports snmp and if it is configured as well.
Good luck.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Who is online
Users browsing this forum: No registered users and 0 guests