Windows Server in/out graph

[dsteffen]

Dear Cacti-Forum,

I have install the cacti 0.8.6f version and the most things works fine.

Only the Interface-Traffic Graphs for my Windows 2000 Server give me the same inbound Traffic then the outbound traffic.

When I monitor my Cisco Router anything is Fine. The Inbound Traffic is not the same then the outbound traffic.

Was anyone an idea? In the attchement you can find one Interface Graph from my W2K Server.

Here the Data Query Debug Information form this server:

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='1'] index: 1 [from value]
+ Found item [ifIndex='16777219'] index: 16777219 [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='1'] index: 1 [from value]
+ Found item [ifOperStatus='1'] index: 16777219 [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='4D:53:20:54:43:50:20:4C:6F:6F:70:62:61:63:6B:20'] index: 1 [from value]
+ Found item [ifDescr='69:6E:74:65:72:66:61:63:65:00'] index: 69 6E 74 65 72 66 61 63 65 00 [from value]
+ Found item [ifDescr='42:72:6F:61:64:63:6F:6D:20:4E:65:74:58:74:72:65'] index: 16777219 [from value]
+ Found item [ifDescr='6D:65:20:47:69:67:61:62:69:74:20:45:74:68:65:72'] index: 6D 65 20 47 69 67 61 62 69 74 20 45 74 68 65 72 [from value]
+ Found item [ifDescr='6E:65:74:20:44:72:69:76:65:72:00'] index: 6E 65 74 20 44 72 69 76 65 72 00 [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='24'] index: 1 [from value]
+ Found item [ifType='6'] index: 16777219 [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='10000000'] index: 1 [from value]
+ Found item [ifSpeed='100000000'] index: 16777219 [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr=''] index: 1 [from value]
+ Found item [ifHwAddr='00:30:05:94:7D:7C'] index: 16777219 [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'
+ Found item [ifIP='10.1.100.11'] index: 16777219 [from regexp oid parse]
+ Found item [ifIP='127.0.0.1'] index: 1 [from regexp oid parse]
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/srv/www/htdocs/cacti/resource/snmp_queries/interface.xml'

[gandalf]

Please select Data Queries, then SNMP - Interface Statistics (if that is the Data Query you are using) and finally <your Graph Template for the Windows Machine>. You'll find Associated Data Templates about the middle of the screen. See, whether traffic_in and traffic_out refer to the same data source. Change the wrong one of both. Remember to have both items checked (see Checkbox to the right).
You'll have to Clear Poller Cache (see: System Utilities) to refresh!
Reinhard

[TheWitness]

It's interesting, but it is possible that your host is actually reporting correct data. I am more concerned with net-snmp/php_snmp returning HEX for the ifDescr.

Please state your php version, net-snmp version and you php modules:

php -v
php -m
snmpwalk

Thanks,

TheWitness