Network interfaces on Compaq Proliant 380 G4 don't show

[antant]

Hello,

Does anyone have experience with monitoring the network interfaces on a proliant 380 G4. Everything works fine, only the network interfaces don't show up. When I do a verbose query I get the following with a lot of "No Such Object available on this agent at this OID". Anybody knows what to do?

Thanks for any help.

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='No Such Object available on this agent at this OID'] index: 1 [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='No Such Object available on this agent at this OID'] index: 8 [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='No Such Object available on this agent at this OID'] index: 2 [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Found item [ifName='No more variables left in this MIB View (It is past the end of the MIB tree)'] index: 1 [from value]
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Found item [ifAlias='No more variables left in this MIB View (It is past the end of the MIB tree)'] index: 18 [from value]
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='No Such Object available on this agent at this OID'] index: 3 [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='No Such Object available on this agent at this OID'] index: 5 [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr='No Such Object available on this agent at this OID'] index: 6 [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'
+ Found item [ifIP='4.20.1.2'] index: 1 [from regexp oid parse]
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/usr/share/cacti/site/resource/snmp_queries/interface.xml'

[rony]

Problem with the agent running on that server.

[antant]

Hi,

I've disabled the agents (hpasm, hpsmhd) en restored the snmpd.conf, but it still gives the same result. Any tips about how to continue? The network device is a tg3.

Thanks for any advice.

[maximusx]

I have the same problem on a Compaq Proliant Generation1, Do i have to install Compaq Insite manager first?

Who has solved this?

[gandalf]

Please select the cactus from main page and report cacti version and usage of php-snmp
Reinhard

[maximusx]

what you mean with this, i have to make a new post?

[gandalf]

No. I simply want to know your cacti version and whether cacti discovered a php-snmp package. Both are reported in your cacti installation when you select the cactus
Reinhard

[maximusx]

ok, thanks:

Cacti variables:
Version 0.8.6h
Operating System: Unix
PHP SNMP Support: no

[gandalf]

Please try installing php-snmp and retry
Reinhard