No graphs after a new installation

[websat]

Hi

I have no graphs: "ERROR: opening 'E:\rrdtool/rra/localhost_traffic_in_27.rrd': No such file or directory"

In the cacti log " 08/25/2005 09:39:57 AM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting."


cacti-0.8.6f

rrdtool-cygwipn-1.2.11 (from cacti.net)

php 5

[BSOD2600]

You have no rrd file because a) cacti has not collected any valid data or b) you haven't waited 2 polling cycles.

Turn the polling level in cacti to debug (Settings | Polling level) for one cycle and paste the output of the log file (./cacti/cacti.log). If it contains WEBLOG entries, then don't bother posting since they just clutter up the log. Turn off WEBEVENTS logging and try again.

[websat]

08/25/2005 10:10:00 AM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: c:/php5/php.exe, ARGS: -q e:\rrdtool/cmd.php 0 1]
08/25/2005 10:09:57 AM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.
08/25/2005 10:05:00 AM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: c:/php5/php.exe, ARGS: -q e:\rrdtool/cmd.php 0 1]
08/25/2005 10:04:57 AM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.

[websat]

HELP

[BSOD2600]

You didn't properly enable debugging. You should be seeing a LOT more data. Try following the instructions again.

[websat]

I do that:

[BSOD2600]

1) Disable web events, like I said in my earlier post. They clutter up the debug log.
2) try changing the Poller Logging Level to low, saving and then back to debug and save. Post the log file for one cycle.

[websat]

08/26/2005 11:49:57 AM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.
08/26/2005 11:44:57 AM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.

[websat]

No idea ?

[BSOD2600]

Nope (never seen this before).

Need a dev why debug isn't working.

[websat]

I made a new installation and work well now !!!
Strange

Thanks for the help