Cactid & MIB's Location under Win32

[baetes]

Hi at all,
I'm new on cacti.......

I use Cacti 0.8.6f / php5x / cactid under Windows2003Srv.

I've Problems with Cactid

++++++++++++++++++++++++++++

C:\cactid>cactid
CACTID: Using cactid config file [cactid.conf]
CACTID: Version 0.8.6e starting
No log handling enabled - turning on stderr logging
IP-MIB: Module not found
IF-MIB: Module not found
TCP-MIB: Module not found
UDP-MIB: Module not found
HOST-RESOURCES-MIB: Module not found
SNMPv2-MIB: Module not found
RFC1213-MIB: Module not found
SNMPv2-SMI: Module not found
NOTIFICATION-LOG-MIB: Module not found
UCD-SNMP-MIB: Module not found
UCD-DEMO-MIB: Module not found
SNMP-TARGET-MIB: Module not found
NET-SNMP-AGENT-MIB: Module not found
SNMP-VIEW-BASED-ACM-MIB: Module not found
SNMP-COMMUNITY-MIB: Module not found
UCD-DLMOD-MIB: Module not found
SNMP-FRAMEWORK-MIB: Module not found
SNMP-MPD-MIB: Module not found
SNMP-USER-BASED-SM-MIB: Module not found
SNMP-NOTIFICATION-MIB: Module not found
SNMPv2-TM: Module not found
CACTID: Execution Time: 3.2670 s, Threads: 10, Hosts: 6
+++++++++++++++++++++++
Some Idea where the modules / mibs are located ???

thx

[BSOD2600]

Add the following two environment variables to your system using the procedure above: MIBDIRS=c:\php\mibs, and PHPRC=c:\php.

If you downloaded full php package, then you should have the proper MIB modules.

[baetes]

Hi,
thx for answer... I've testetd both pathes C:\PHP\MIBS & C:\PHP\Extras\MIBS (There are xxxx.mib.txt locate).
It doesnt properly works....
Have i load (or rename) this files ?????
There is an .index - file in the mib-directory and syntax looks like :

IP-MIB IP-MIB.txt

If i test the php.exe with poller.php the same error.................

[BSOD2600]

So after creating a system wide variable called MIBDIRS and setting it to c:\php\mibs, php is still complaining about them? That doesn't make any sense, unless you lack the mibs in that directory.

Type: php -m and paste the output.

[baetes]

Hi,
output from php -m

C:\cactid>C:\php\php.exe -m
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
[PHP Modules]
bcmath
calendar
com_dotnet
ctype
dom
ftp
iconv
libxml
mysql
odbc
pcre
session
SimpleXML
snmp
sockets
SPL
SQLite
standard
tokenizer
wddx
xml
zlib

[Zend Modules]


C:\cactid>

Regards Baetes

[baetes]

Hi BSOD2600,
now i've written the Path correctly and it works.............


i've follow errors in cacti.log

CACTID: Poller[0] Host[11] DS[13] WARNING: Result from SNMP not valid. Partial Result

Any idea ?

[baetes]

Hi,
here Cacti - Log File........

Question:
Must be there any file in ...htdocs\\Cacti\rra ????

[baetes]

I've checked permissions to:

...\htdocs\cacti\rra &
c:\rrdtool

Everyone -> Change.

I doesn't reply any Graphs or files in ....\rra

Thx all for given ideas

[TheWitness]

Another trick to get rid of mib warnings. Use the environment variable:

MIBS=NONE

TheWitness

[BSOD2600]

1) next time you post a log, post the actual text and not a screen shot.

2) If you manually run poller.php, do the rrd files get created? Still sounds like a security issue on the folder/files which is why they're not getting created. The web user have read rights to cmd.exe ?

[baetes]

Hi,
i've checked permissions....

...\htdocs\cacti\... &
c:\rrdtool

Everyone -> Change.

If i run C:\php\php-win.exe C:\Apache\Apache2\htdocs\cacti\cmd.php

no files are created to ...\rra (

Next Time i'll post a file / no screenshot.........

Thx

[BSOD2600]

You know the scheduled task is suppose to be running poller.php. Try running that manually and see what happens.

[baetes]

Sorry... Copy&Paste - failure........

My Scheduled Task is:

C:\php\php-win.exe C:\Apache\Apache2\htdocs\cacti\poller.php

No files in ..\cacti\rra....

extract from cacti.log:

08/19/2005 10:20:05 AM - SYSTEM STATS: Time: 5.3424 s, Method: cactid, Processes: 8, Threads: 10, Hosts: 5, Hosts/Process: 1, Data Sources 4, RRDs Processed 2
08/19/2005 10:22:33 AM - CACTID: Poller[0] Host[22] DS[29] SNMP: v1: S030A7027, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.65539, value: 752680639
08/19/2005 10:22:33 AM - CACTID: Poller[0] Host[22] DS[29] SNMP: v1: S030A7027, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.65539, value: 2040353708
08/19/2005 10:22:33 AM - CACTID: Poller[0] Host[20] DS[28] SNMP: v1: s040a6514, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.65539, value: 458611722
08/19/2005 10:22:33 AM - CACTID: Poller[0] Host[20] DS[28] SNMP: v1: s040a6514, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.65539, value: 1132061743
08/19/2005 10:22:33 AM - CACTID: Poller[0] Time: 4.4130 s, Threads: 10, Hosts: 1
08/19/2005 10:22:34 AM - CACTID: Poller[0] Time: 4.6970 s, Threads: 10, Hosts: 2
08/19/2005 10:22:34 AM - CACTID: Poller[0] Time: 4.6460 s, Threads: 10, Hosts: 2
08/19/2005 10:22:34 AM - CACTID: Poller[0] Time: 4.6010 s, Threads: 10, Hosts: 2
08/19/2005 10:22:34 AM - CACTID: Poller[0] Time: 4.8140 s, Threads: 10, Hosts: 2
08/19/2005 10:22:34 AM - SYSTEM STATS: Time: 5.3596 s, Method: cactid, Processes: 8, Threads: 10, Hosts: 5, Hosts/Process: 1, Data Sources 4, RRDs Processed 2

I mean.... some querys results values, but no graphs or files exist and the permission are already OK.

I put out my hairs

[TheWitness]

run the following from a command line in DEBUG mode:

"php poller.php"

Run this while in the cacti directory. You should see a bunch of:

CACTI2RRD messages followed by "Ok".

TheWitness

[baetes]

Hi,
if i run php poller.php follow messages..........
C:\Apache\Apache2\htdocs\cacti>php poller.php
Waiting on 5/5 pollers.
No log handling enabled - turning on stderr logging
NET-SNMP-AGENT-MIB: Module not found
No log handling enabled - turning on stderr logging
NET-SNMP-AGENT-MIB: Module not found
No log handling enabled - turning on stderr logging
NET-SNMP-AGENT-MIB: Module not found
No log handling enabled - turning on stderr logging
NET-SNMP-AGENT-MIB: Module not found
Waiting on 5/5 pollers.
No log handling enabled - turning on stderr logging
NET-SNMP-AGENT-MIB: Module not found
Waiting on 5/5 pollers.
08/19/2005 12:12:03 PM - SYSTEM STATS: Time: 3.3100 s, Method: cactid, Processes
: 8, Threads: 10, Hosts: 5, Hosts/Process: 1, Data Sources 4, RRDs Processed 2

If i copy NET-SNMP-AGENT-MIB to...\php\...mibs
follow errors :
(extract !!)

Undefined identifier: netSnmpNotifications near line 459 of C:\php\extras\mibs/N
ET-SNMP-AGENT-MIB_.txt
Undefined identifier: netSnmpNotifications near line 459 of C:\php\extras\mibs/N
ET-SNMP-AGENT-MIB_.txt
Undefined identifier: netSnmpNotifications near line 459 of C:\php\extras\mibs/N
ET-SNMP-AGENT-MIB_.txt
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsCacheEntry ::= { nsCacheTable 1 }
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugTokenTable ::= { nsConfigDebug 4
}
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugDumpPdu ::= { nsConfigDebug 3 }
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsDebugOutputAll ::= { nsConfigDebug 2 }

Thx for Help