Cisco AS5300 Generic OID woes

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
TheSystem007
Posts: 4
Joined: Sat Jun 04, 2005 4:11 pm
Location: Pago Pago, American Samoa

Cisco AS5300 Generic OID woes

Post by TheSystem007 »

All-

I've just gotten Cacti running within the last 2 weeks, instantly useful software!

I'm having difficulty retrieving a single OID from a Cisco AS 5300 Dialup device...

I'm looking to see how many modems are active at any time.

W/ SNMPwalk from my Cacti host, I get the results I'm looking for.

[root@mon1 snmp_queries]# snmpwalk -Os -c mystring -v 2c 192.168.7.86 .1.3.6.1.4.1.9.10.19.1.1.4
enterprises.9.10.19.1.1.4.0 = Gauge32: 62

(62 active modems)

When I setup a "SNMP Generic OID Template" graph, I get nothing in the graph. Can somebody help me out here?

Many thanks in advance-

Kyle Johnson
Top
User avatar
rony
Developer/Forum Admin
Posts: 6022
Joined: Mon Nov 17, 2003 6:35 pm
Location: Michigan, USA
Contact:
Contact rony

Post by rony »

Is the DS set to Counter or Gauge?
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Top
TheSystem007
Posts: 4
Joined: Sat Jun 04, 2005 4:11 pm
Location: Pago Pago, American Samoa

Post by TheSystem007 »

I used Gauge...
Top
TheSystem007
Posts: 4
Joined: Sat Jun 04, 2005 4:11 pm
Location: Pago Pago, American Samoa

Close the case!

Post by TheSystem007 »

Close the case on this one.

I got some off-forum assistance (thanks JJP!)

Turns out I need a ".0" at the end of the OID definition. <shrug>

Thanks all-

Kyle
Top
Post Reply

Return to “Help: General”

Who is online

Users browsing this forum: No registered users and 2 guests