Success [0 Items, 0 Rows] for both CPU and HDD

[misterbud]

Ok - I have been all through the fourms - and can not seem to find a fix for this?

FC3

cacti 0.8.6c
Operating System: unix
PHP SNMP Support: yes

php-4.3.10-3.2
mysql-3.23.58-14
rrdtool-1.0.49-1.1.fc3.rf
net-snmp-5.1.2-11

I have installed the patches for 8.6c

Debug gives me this;

Code: Select all

+ Running data query [8].
+ Found type = '6 '[script query].
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_disk.xml'
+ XML file parsed ok.
+ Executing script for list of indexes '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_disk.php p4-24g.local.lan public 1 2 index'
+ Executing script query '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_disk.php p4-24g.local.lan public 1 2 query index'
+ Executing script query '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_disk.php p4-24g.local.lan public 1 2 query description'
+ Executing script query '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_disk.php p4-24g.local.lan public 1 2 query sau'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_disk.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_disk.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_disk.xml'

Code: Select all

+ Running data query [9].
+ Found type = '6 '[script query].
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_cpu.xml'
+ XML file parsed ok.
+ Executing script for list of indexes '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_cpu.php p4-24g.local.lan public 1 index'
+ Executing script query '/usr/bin/php -q /var/www/html/cacti/scripts/ss_host_cpu.php p4-24g.local.lan public 1 query index'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_cpu.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_cpu.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/script_server/host_cpu.xml'

I can snmpwalk just the machines in question, just fine;

Code: Select all

-sh-3.00$ snmpwalk -c public -v 1 192.168.1.101 1.3.6.1.2.1.25.3.3.1 
HOST-RESOURCES-MIB::hrProcessorFrwID.3 = OID: SNMPv2-SMI::zeroDotZero
HOST-RESOURCES-MIB::hrProcessorLoad.3 = INTEGER: 17

-sh-3.00$ snmpwalk -c public -v 1 192.168.1.101 .1.3.6.1.2.1.25.2.3.1.5
HOST-RESOURCES-MIB::hrStorageSize.1 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageSize.2 = INTEGER: 15012734
HOST-RESOURCES-MIB::hrStorageSize.3 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageSize.4 = INTEGER: 9914
HOST-RESOURCES-MIB::hrStorageSize.5 = INTEGER: 4086
-sh-3.00$ snmpwalk -c public -v 1 192.168.1.101 .1.3.6.1.2.1.25.2.3.1.6
HOST-RESOURCES-MIB::hrStorageUsed.1 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageUsed.2 = INTEGER: 3576673
HOST-RESOURCES-MIB::hrStorageUsed.3 = INTEGER: 0
HOST-RESOURCES-MIB::hrStorageUsed.4 = INTEGER: 3305
HOST-RESOURCES-MIB::hrStorageUsed.5 = INTEGER: 2524

If I run the scripts by hand they work;

Code: Select all

-sh-3.00$ /usr/bin/php -q /var/www/html/cacti/scripts/ss_host_disk.php p3-1000.local.lan public 1 2 query description     
1!A:
2!C: Label:  Serial Number 3f172e5f
3!D:
4!Virtual Memory
5!Physical Memory

Does anyone have an idea where to look? The network interface stuff works fine, the local box its running on is working fine for graphs.. I have not moved on to doing any queries to my linux machines yet, since I can not even get the the window ones to work - and clearly SNMP is working, etc..

[TheWitness]

There is some issue currently with FC3 that is affecting multiple users. If you can figure it out, you get the prize. Question: Did you install from RPM? If so, please install from source and see if you have better luck.

TheWitness

[misterbud]

There is some issue currently with FC3 that is affecting multiple users. If you can figure it out, you get the prize.
TheWitness

Yes I installed from RPM, guess I can try building it -- but if I had to guess, I would say it has something to do with the script and php 4.3.10?

If you run the command that is says its runs in the verbose debug - you do get info back - but debug does not show this.. So I would guess that is where the problem is. Looks to me like the script is not reading the response? when run from within cacti -- what would of changed?

I have only had it up and running for a day - so I have not figured out how it all works yet, I was hoping to find a quick fix for the issue?? Does anyone have a work around - I saw some mention of rolling back your php to 4.3.6? But could not tell if that actually fixed the issue or not?

[TheWitness]

Have you tried cactid with any success?

TheWitness

[Linzer]

There is some issue currently with FC3 that is affecting multiple users. If you can figure it out, you get the prize. Question: Did you install from RPM? If so, please install from source and see if you have better luck.

TheWitness

I'm running successfully with FC3. A Synaptic "Mark All Upgrades" along the way broke things for me. I was able to successfully get things running again by running php-rrdtool-1.0.49-1.1.fc3.fr as opposed to php-rrdtool-1.0.49-1.1.fc3.rf (note the difference in the last two characters).

The apt RPM repositories I'm running are:

dag.list:rpm http://apt.sw.be/ fedora/3/en/i386 dag
dries.list:rpm http://apt.sw.be/ dries/fedora/fc3/i386 dries
freshrpms.list:rpm http://ayo.freshrpms.net/ fedora/linux/3/i386 freshrpms
newrpms.list:rpm http://newrpms.sunsite.dk/apt/ redhat/en/i386/fc3 newrpms
os.list:rpm http://ayo.freshrpms.net/ fedora/linux/3/i386 core updates

HTH