Just what the subject says.
Updated to 1.2.27 from 1.2.25 and the values written to the rrd files were all nan, and therefore wouldn't display on the graph or anything.
I have done data source debug, the rrd files are being updated, I checked the snmpwalk command it does to see if it works and it does, checked the credentials etc.
No idea why the data is nan, but its hard to test as boost seems to limit writing to rrd files.
Would really appreciate any suggestions.
Thanks.
After upgrade to 1.2.27 rrd files only getting nan
Moderators: Developers, Moderators
After upgrade to 1.2.27 rrd files only getting nan
Last edited by Jestt on Thu Sep 19, 2024 4:40 am, edited 1 time in total.
Re: After upgrade to 1.2.27 rrd files only getting nan
Debug not completed after 5 pollings.
Failed fields: last_result, valid_data, rra_timestamp2
RRDfile not updated after polling
Data Source was not polled
Failed fields: last_result, valid_data, rra_timestamp2
RRDfile not updated after polling
Data Source was not polled
Re: After upgrade to 1.2.27 rrd files only getting nan
It appears to be stuck processing the data for a long time.
2024/09/19 11:00:37 - POLLER: Poller[1] PID[1228] Processing Poller Output with 40000 maximum items to be processed
This over and over
2024/09/19 11:00:37 - POLLER: Poller[1] PID[1228] Processing Poller Output with 40000 maximum items to be processed
This over and over
Re: After upgrade to 1.2.27 rrd files only getting nan
Did you use spine or cmd.php ?
Any error in the log ?
And on cacti_stderr.log ?
Any error in the log ?
And on cacti_stderr.log ?
Test
Almalinux
php 8.2.14
mariadb 10.6.16
Cacti 1.2.27
Spine 1.2.27
RRD 1.7.2
thold 1.8
monitor 2.5
syslog 3.2
flowview: 3.3
weathermap 1.0 Beta
Almalinux
php 8.2.14
mariadb 10.6.16
Cacti 1.2.27
Spine 1.2.27
RRD 1.7.2
thold 1.8
monitor 2.5
syslog 3.2
flowview: 3.3
weathermap 1.0 Beta
Re: After upgrade to 1.2.27 rrd files only getting nan
I managed to fix it, it was related to spine.conf having wrong credentials.
However I reverted to 1.2.25, so I need to go to 1.2.27
However I reverted to 1.2.25, so I need to go to 1.2.27
Who is online
Users browsing this forum: No registered users and 1 guest