Cactid not graphing

[kiokorobert]

I have upgraded from 0.8.5 to 0.8.6 and cactid is not graphing.With CMD.PHP, I am getting correct debug information from the logs as can be seen below. With Cactid, all I am getting is a message - maximum runtime exceeded. Can someone help me get the graphs on cactid as I have alot of devices I am polling and using cmd.php is slow and there are some breakages in graphing using cmd.php.

Debug output with CMD.PHP -
02/01/2005 10:58:33 AM - CMDPHP: Poller[0] Host[24] SNMP: Host responded to SNMP
02/01/2005 10:58:35 AM - CMDPHP: Poller[0] Host[24] CMD: perl /usr/local/cacti-0.8.6/scripts/netscreen_stats.pl 10.200.1.101, output: cpu1:1 cpu5:1 cpu15:1 memory_allocated:10492960 memoryAvailable:13380720 memoryFragmented:6563 sessionsAllocated:94 sessionsMaximum:2048 sessionsFailed:0
02/01/2005 10:58:37 AM - CMDPHP: Poller[0] Host[24] CMD: perl /usr/local/cacti-0.8.6/scripts/netscreen_stats.pl 10.200.1.101, output: cpu1:1 cpu5:1 cpu15:1 memory_allocated:10492896 memoryAvailable:13380784 memoryFragmented:6563 sessionsAllocated:90 sessionsMaximum:2048 sessionsFailed:0
02/01/2005 10:58:39 AM - CMDPHP: Poller[0] Host[24] CMD: perl /usr/local/cacti-0.8.6/scripts/netscreen_stats.pl 10.200.1.101, output: cpu1:1 cpu5:1 cpu15:1 memory_allocated:10492896 memoryAvailable:13380784 memoryFragmented:6563 sessionsAllocated:88 sessionsMaximum:2048 sessionsFailed:0


Debug output with Cactid -
02/01/2005 01:29:58 PM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.
02/01/2005 01:34:58 PM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.
02/01/2005 01:39:57 PM - POLLER: Poller[0] Maximum runtime of 296 seconds exceeded. Exiting.


Can someone please help as my graphs with CMD.PHP have alot of gaps inbetween. I have tried increasing the number of concurrent processes but without any success. Thanks.

[Ev]

Under which OS (Linux ? Solaris ? )

We have similar problem under Solaris 9

[kiokorobert]

I have this running under linux (Mandrake 10.0). I have tried everything but no success.

[TheWitness]

1) Verify that Cactid 0.8.6x works from the command line. Insure that logging is set to something other than low.
2) Verify that your Cactid path is accurate in Settings->Paths
3) Make sure that you don't have a permissions problem.

TheWitness