[1 minute rrd setting] graph refresh not sharply at all

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
lambda89
Posts: 3
Joined: Sat May 14, 2022 3:48 pm

[1 minute rrd setting] graph refresh not sharply at all

Post by lambda89 »

Hello there,

I am monitoring trafic through two opnsense firewalls
1.png
1.png (5.11 KiB) Viewed 719 times
2.png
2.png (14.66 KiB) Viewed 719 times
Once trafic is established I shut the iperf tool down

Code: Select all

[  5]  77.00-78.00  sec  34.5 MBytes   289 Mbits/sec    0    213 KBytes
[  5]  78.00-79.00  sec  40.6 MBytes   341 Mbits/sec    0    213 KBytes
[  5]  79.00-80.00  sec  26.9 MBytes   226 Mbits/sec    0    213 KBytes
[  5]  80.00-81.00  sec  29.2 MBytes   245 Mbits/sec    0    213 KBytes
[  5]  81.00-82.00  sec  32.6 MBytes   274 Mbits/sec    0    213 KBytes
[  5]  82.00-83.00  sec  40.5 MBytes   340 Mbits/sec    0    213 KBytes
[  5]  83.00-84.00  sec  35.9 MBytes   301 Mbits/sec    0    213 KBytes
[  5]  84.00-85.00  sec  43.9 MBytes   368 Mbits/sec    0    213 KBytes
[  5]  85.00-86.00  sec  41.0 MBytes   344 Mbits/sec    0    213 KBytes
[  5]  86.00-87.00  sec  44.4 MBytes   373 Mbits/sec    0    213 KBytes
[  5]  87.00-88.00  sec  42.0 MBytes   352 Mbits/sec    0    213 KBytes
[  5]  88.00-89.00  sec  45.4 MBytes   380 Mbits/sec    0    213 KBytes
[  5]  89.00-90.00  sec  42.5 MBytes   357 Mbits/sec    0    213 KBytes
^C[  5]  90.00-90.85  sec  37.9 MBytes   374 Mbits/sec    0    213 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
But it takes extra minutes to show the link report no trafic anymore
3.png
3.png (14.89 KiB) Viewed 719 times
4.png
4.png (11.78 KiB) Viewed 719 times
5.png
5.png (12.45 KiB) Viewed 719 times
I don’t understand the behavior, since my .rrd updates successfully every minutes once I break the bandwidth iperf test the next update (the one at 22:20 184-185%) must show bandwidth as zero ?
Images above show the bandwidth comes up as intermediates values progressivly decreasing to show a full available link at 22:22 (which is really very laggy)

Does my poller/1-minute polling is not working or is it normal cacti weathermap behavior ?

(hope my query is understandable)

thx you
lambda89
Posts: 3
Joined: Sat May 14, 2022 3:48 pm

Re: [1 minute rrd setting] graph refresh not sharply at all

Post by lambda89 »

Hello

Since this topic focus on weathermap-plugins, it may not be at the right place.
6.png
6.png (234 KiB) Viewed 717 times
Seems correlated but graphs reflects the described behavior (gradually decrease does not reflect real ground scenario)

Any hints appreciated

Seb
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests