Graph help: 40GB connection

[krejar]

I have a new 40GB connection on one of my Juniper switches, we upgraded from a 10GB connection. The problem I am facing is the graph is showing it as bits per second (k). My old 10GB connection graph is showing bits per second (M). I am using the In/Out Bits (64-bit, 95th) template. My cacti version is 1.2.10.

How do I go about having my new 40GB connection show the correct scale?

40GB:

40gb.png (114.96 KiB) Viewed 1037 times

10GB:

10gb.png (113.74 KiB) Viewed 1037 times

[TheWitness]

Starting in Cacti 1.2.11, you can set the max value for the Data Template in and out values to "|query_ifSpeed|". If you do that, then for new Graphs, the max value in the RRDfile will be set correctly. But for old Data Sources, you need to edit the Data Source and then Select "Turn on Data Source Info Mode" and you should find an RRDtool command to correct the maximum value.

Note though that some interfaces do not report the correct ifSpeed, like bonded interfaces in older versions of net-snmp.