Cacti v1.2.2 device template!

[serdar01]

Hello ,

I'm using cacti v1.2.2 on centos 7 and i have palo alto FW 3000 series and Aruba 5406 procurve switch . But compatible with cacti version 1.2.2 for these two devices I couldn't find a template .

Please can you help me how to add these two devices .

[jkw117@msn.com]

Serdar01,
I have almost the same setup (PA-3260's in HA) I had cacti working fine with my Pa-2040's but we had to upgrade. (and upgrade the OS)
There is a Paloalto template that someone made for older versions, it will import/upgrade but it's a pain. I'm actually still running Cacti pre 1.x simply because of getting weathermap to work (which is super useful) I am actually checking to see if they've gotten that working again.
But as a side note. Something I noticed with the upgrade (is that cacti is seeing my ethernet1/1 and giving a response back of 0. Upon digging into this at the moment it looks like it's using the wrong OID (which it gets from the OID on the firewall..(I think) )
I've deleted, recreated every time it sees it as ethernet1/1 but uses the OID of

02/02/2021 10:09:03 AM - SPINE: Poller[0] Host[178] TH[2] DS[8939] SNMP: v2: 172.19.254.2, dsname: traffic_in, oid: .1.3.6.1.2.1.2.2.1.10.5, value: 0
02/02/2021 10:09:03 AM - SPINE: Poller[0] Host[178] TH[2] DS[8939] SNMP: v2: 172.19.254.2, dsname: traffic_out, oid: .1.3.6.1.2.1.2.2.1.16.5, value: 0

When I use a mib browser if I understand it, the oid should be: .1.3.6.1.2.1.2.2.1.10.1 for the traffic_in
I'm thinking at the moment this is because of a mix up somewhere, as on certain parts it puts the HA1-a,HA1-b, HCSI ports before the ethernet ports, and other portions of the OID it doesn't include them.. which messes up their numbers..
So double check your ports..

[TheWitness]

This was so many releases ago. Update to 1.2.21.