Graphs for same interface on v0.8.8a & v1.1.38 are different

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
sat38
Posts: 4
Joined: Fri Oct 26, 2018 2:11 am

Graphs for same interface on v0.8.8a & v1.1.38 are different

Post by sat38 »

I have two different version of cacti, v0.8.8a and v1.1.38. And I found that the Traffic Graph behave different. It seems the peak values for v1.1.38 are smaller that old cacti version. The old cacti have been used for few years and the its values seem correct. Could any expert can help me what's wrong with the new cacti?
Attachments
v1.1.38_2.png
v1.1.38_2.png (145.41 KiB) Viewed 502 times
v0.8.8a_2.png
v0.8.8a_2.png (115.38 KiB) Viewed 502 times
Beast
Cacti User
Posts: 74
Joined: Tue Feb 07, 2017 1:55 pm
Location: Venezuela

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by Beast »

Hi sat38, i´m no expert but i can think in 2 possibilities:

1-the 245 MB is a false reading (spike to kill). It casualy hapend to my yesterday with a peak of 80GB in an interface that can´t exceed 2MB.
2-even when your are monitoring the same interface there are 2 diferent polling cycles that probably are not in sync between each other, so the new cacti poller could miss the 245MB peak but the old cacti get it.
Beast
GitHub: DoubleBeast
sat38
Posts: 4
Joined: Fri Oct 26, 2018 2:11 am

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by sat38 »

Hi Beast, I have another SNMP server to monitor the traffic, the traffic value from it is very similar to v0.8.8a, and the peak value is actual correct. I guess the graph from v1.1.38 does not show the actual peak. Since I would like to know the internet bandwidth is sufficient to handle the peak traffic, it is important that the graph could show the actual value. Just don't why on v1.1.38 has so much different. Is it a bug or configuration issue?
Beast
Cacti User
Posts: 74
Joined: Tue Feb 07, 2017 1:55 pm
Location: Venezuela

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by Beast »

-verify if the new cacti have the graphs set for 64bit counters (should use those when the traffic is above 100M)
- i don´t know if this is an option for that interface but if you can try to force the traffic for a couple of polling cicles (or simply use realtime) to check if it register the higher bandwide usage.
Beast
GitHub: DoubleBeast
sat38
Posts: 4
Joined: Fri Oct 26, 2018 2:11 am

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by sat38 »

Hi Beast, I realized the graph has 32-bit & 64-bit different after I read your post. And I now removed all previous graph and set the new graphs to 64-bit, will see how will be the values in the next couple days. Thanks for you help anyway. Cheers!
sat38
Posts: 4
Joined: Fri Oct 26, 2018 2:11 am

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by sat38 »

Hi Beast, the problem was fixed by using 64-bit graph, since the old version doesn't have this 64-bit selection, I think this is the part I missed. Thanks for your help!
Beast
Cacti User
Posts: 74
Joined: Tue Feb 07, 2017 1:55 pm
Location: Venezuela

Re: Graphs for same interface on v0.8.8a & v1.1.38 are diffe

Post by Beast »

Excellent sat38! glad i could help you.
Beast
GitHub: DoubleBeast
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests