SNMP error :No Response Received

[malhi]

im trying to create configuration folder but it does not work.

here is the error massage
C:\mrtg-2.17.4\bin>perl cfgmaker public@103.4.94.94 --global "WorkDir: c:\www\mr
tg" --output mrtg.cfg
--base: Get Device Info on public@103.4.94.94:
SNMP Error:
no response received
SNMPv1_Session (remote host: "103.4.94.94" [103.4.94.94].161)
community: "public"
request ID: -2140572716
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at C:/mrtg-2.17.4/bin\..\lib\mrtg2/SNMP_util.pm line 651.
SNMPWALK Problem for 1.3.6.1.2.1.1 on public@103.4.94.94::::::v4only
at cfgmaker line 951.
WARNING: Skipping public@103.4.94.94: as no info could be retrieved

Use of uninitialized value $comment_sysdescr in substitution (s///) at cfgmaker
line 379.
Use of uninitialized value $sysname in concatenation (.) or string at cfgmaker l
ine 412.
Use of uninitialized value $comment_sysdescr in concatenation (.) or string at c
fgmaker line 412.
Use of uninitialized value $syscontact in concatenation (.) or string at cfgmake
r line 412.
Use of uninitialized value $syslocation in concatenation (.) or string at cfgmak
er line 412.
--base: Writing mrtg.cfg

[jblack]

A couple of things cause a "No Response Received".

1) You have the wrong community name

2) You have connectivity issues of some sort. It could be SNMP isn't running on the server or maybe a firewall between the polling device and the server.

You probably shouldn't post your IPs in a public forum like this. Also looks like you are using MRTG. This is a forum for cacti.