Already tried to create graph for localhost and it's successful
But when I tried to set new host for monitoring windows server, SNMP Error which is famous problem within Cacti is coming to me.
Already tried suggestion by adding IP Address on :
- SNMP Services -> Traps
- SNMP Services -> Security
But still got SNMP Error.
Host Template : Windows 2000/XP Host
Downed Device Detection : Ping or SNMP Uptime
Ping Method : UDP Ping
SNMP Version : Version 2
Spine : 0.8.8a
Cacti : 0.8.8f
Already tried to ping remote host and its working but still got SNMP Error and snmpwalk got no response.
Please help me.
(SOLVED) SNMP Error and SNMPWALK got no response
Moderators: Developers, Moderators
(SOLVED) SNMP Error and SNMPWALK got no response
Last edited by zetoo on Thu Dec 08, 2016 4:24 am, edited 1 time in total.
Re: (Help) SNMP Error and SNMPWALK got no response
Trying on cmd : snmpwalk -v2c -c "Community" "IP Address or Hostname" and its fine
The problem is when I tried it on remote host, it will get no response no matter what.
I am using Spine as poller. When I ping the remote host its fine with 1ms.
UPDATE :
- Status from Down change to Recovering and finally Up but still got SNMP Error
- Checked Accept SNMP packets from any host and restart SNMP Service but still got no response.
- Checked all service option on Agent tab but still got no response
The problem is when I tried it on remote host, it will get no response no matter what.
I am using Spine as poller. When I ping the remote host its fine with 1ms.
UPDATE :
- Status from Down change to Recovering and finally Up but still got SNMP Error
- Checked Accept SNMP packets from any host and restart SNMP Service but still got no response.
- Checked all service option on Agent tab but still got no response
Re: (Help) SNMP Error and SNMPWALK got no response
Turn out I forgot to enabled SNMP Service on new devices.
Who is online
Users browsing this forum: No registered users and 2 guests