Upgrade from 0.8.8b to 0.8.8h - No longer Graphing

[MD500Pilot]

I am running ubuntu 14.04LTS and had install Cacti via apt-get install cacti when I initially installed it. It was running great but I wanted to upgrade to 0.8.8h which was not available via apt-get.

So I followed the upgrade instructions to the letter, got the new version all up and running but it no longer is adding anything to any of my graphs. I downloaded and compiled spine and tried it instead of cmd.php and no luck there as well.

I am looking for any direction in trying to determine the problem and getting the graphing back up and running.


Many Thanks

[MD500Pilot]

Ping....Ping...

Can anyone offer any help or suggestions on this issue...? Still no polling going on regardless of using cmd.php or spine...

I went to graph debug mode and turned on debugging. I have verified that the file exists that it is looking for, but all of the graphs are still blank:

Code: Select all

ls -alh /usr/share/cacti/rra/ar01_traffic_in_1135.rrd
-rw-r--r-- 1 www-data www-data 93K Sep 16 08:15 /usr/share/cacti/rra/ar01_traffic_in_1135.rrd

screen 2016-09-19 at 2.44.36 PM.jpg (271.84 KiB) Viewed 937 times

Not sure what to check beyond this....

Any help would be greatly appreciated

[cigamit]

http://docs.cacti.net/manual:088:4_help ... #debugging

You first need to check the Cacti log for errors, etc... and go from there.

[MD500Pilot]

http://docs.cacti.net/manual:088:4_help ... #debugging

You first need to check the Cacti log for errors, etc... and go from there.

Thanks Cigamit -

Turns out the troubleshooting didn't help much (all the tests passed) but it did lead me back to through the install step-by-step. Turns out that when I did the apt-get remove cacti (after backing up the db and directory) it also removed the cron job that did the polling. Going back step-by-step through the manual install instructions for 0.8.8h helped me find it, but the debugging pointed me in that direction.

Thanks!