How to display CPU on Weather Map

[kwangrubio]

Hello


I use Weather Map version 0.97A and I want to created display label of CPU. However I have some problem that can't got a real scale.

Could you please to help me check code that it's right ?

LABEL {node:this:inpercent:CPU %0.0f}
INFOURL /cacti/graph.php?rra_id=all&local_graph_id=8018
OVERLIBGRAPH /cacti/graph_image.php?local_graph_id=8018&rra_id=0&graph_nolegend=true&graph_height=100&graph_width=300
TARGET gauge: /var/www/cacti/rra/node_5min_cpu_8318.rrd:5min_cpu:5min_cpu


The RRDTool Command as follow :

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-129600 \
--end=-300 \
--title='node - CPU Usage' \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit='0' \
--vertical-label='percent' \
--slope-mode \
--font TITLE:9: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a='/var/www/cacti/rra/node_5min_cpu_8318.rrd':'5min_cpu':AVERAGE \
--watermark "Company - Confidential Date: 11-Jul-2016 Time: 17:29" \
AREA:a#FF0000FF:'CPU Usage' \
GPRINTLAST:'Current\:%8.0lf' \
GPRINTAVERAGE:'Average\:%8.0lf' \
GPRINTMAX:'Maximum\:%8.0lf'

[Atreides]

Hello,
I use this code for displaying CPU usage :

NODE CPU
LABEL {node:this:outpercent:%k}%
INFOURL /v3/graph.php?rra_id=all&local_graph_id=3393
OVERLIBGRAPH /v3/graph_image.php?rra_id=0&graph_nolegend=true&graph_height=100&graph_width=300&local_graph_id=3393
TARGET gauge:/var/www/html/v3/rra/local_cpu_3421.rrd:-:cpu

[Howie]

Code: Select all

TARGET gauge: /var/w

In the OP's config, there's a space between gauge: and the filename. There shouldn't be. If you looked at the cacti log you would have seen warnings about unrecognised targets.

[kwangrubio]

Code: Select all

TARGET gauge: /var/w

In the OP's config, there's a space between gauge: and the filename. There shouldn't be. If you looked at the cacti log you would have seen warnings about unrecognised targets.

Thanks so much Finally I did't it which a real scale.

However Is it possible to show CPU and temperature in the same label ?

[kwangrubio]

Hello,
I use this code for displaying CPU usage :

NODE CPU
LABEL {node:this:outpercent:%k}%
INFOURL /v3/graph.php?rra_id=all&local_graph_id=3393
OVERLIBGRAPH /v3/graph_image.php?rra_id=0&graph_nolegend=true&graph_height=100&graph_width=300&local_graph_id=3393
TARGET gauge:/var/www/html/v3/rra/local_cpu_3421.rrd:-:cpu

Thanks Atreides

[Howie]

You can show CPU and temperature on the same label, but not on two lines.

You can use two targets, one to fetch an 'in' value, and one to fetch an 'out' value from different rrd files, if you need to.

So based on Atreides' example:

Code: Select all

NODE CPU
  LABEL {node:this:inpercent:%k}% {node:this:bandwidth_out:%.1f}degC
  INFOURL /v3/graph.php?rra_id=all&local_graph_id=3393
  OVERLIBGRAPH /v3/graph_image.php\?rra_id=0&graph_nolegend=true&graph_height=100&graph_width=300&local_graph_id=3393
  TARGET gauge:/var/www/html/v3/rra/local_cpu_3421.rrd:-:cpu gauge:/var/www/html/v3/rra/local_temp_3333.rrd:temp:-

should do that. The DS name might be different in your RRD file, but that's the basic idea. You can also specify two OVERLIBGRAPHs on one line and get a stacked pair of graphs.

[Atreides]

Howie, using this code, the results are reversed : its displaying first the cpu in degG(the value corresponds to that of the temperature) in percents, and temp value corresponds to that of the CPU usage.
If I change the label to : LABEL {node:this:bandwidth_out:%.1f}degC {node:this:inpercent:%k}% , its returning correct values.




PS : Is there a way to TEMPLATE a target then on node to add a value to the TARGET ?
I have tons of oid I have to interrogate, all are consecutive numbers, or only las 2 digits are changed.

[root@msq ~]# snmpwalk -v2c -c test 172.25.232.33 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1025
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1025 = INTEGER: -123
[root@msq ~]# snmpwalk -v2c -c test 172.25.232.33 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1037
SNMPv2-SMI::enterprises.9.9.91.1.1.1.1.4.1037 = INTEGER: -63

It goes + 12 from one interface to another, till the end.

NODE RX_POWER_GI1.1
TEMPLATE RX
TARGET 0.1*snmp:{map:community}:172.25.232.33:-:1.3.6.1.4.1.9.9.91.1.1.1.1.4.1205
POSITION RX_POWER_GI1 0 23

then

NODE RX_POWER_GI1.2
TEMPLATE RX
TARGET : SOMETHING + 12
POSITION RX_POWER_GI1 0 23

[Howie]

Yes, you are correct, I got the target the wrong way around. Sorry!

For the other question, there isn't sorry. I usually use a quick perl/excel/whatever script to generate these. If it's Cacti rrd files for traffic, then maybe cacti-integrate.php (in the random-bits directory) will help? That lets you define a few variables, and it goes to find the relevant Cacti data sources to use.

How exactly would you imagine your feature would look? Can you make an example?

[Atreides]

Maybe sounds silly or stupid (i kinda hate programming/scripts).

TEMPLATE snmp
USEOID 1.3.6.1.4.1.9.9.91.1.1.1.1.4.1025
INCREMENT 12

NODE GI1.1
TARGET snmp:{map:community}:172.25.232.33:-:USEOID+INCREMENT

Or something like this