Siklu EtherHaul (EH) Series Host Templates

[epicfail]

Hello all,

I could not find any templates for Siku's EtherHaul series of microwave radios, so I am going to have to make my own, which have never done before. I have attached the MIB.

I am trying to create all the data necessary to graph signal strength, modulation, and capacity of link.

Here's the SNMP walk:

Executing SNMP get for num of indexes @ '.1.3.6.1.2.1.2.1.0' Index Count: 6
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1' Index Count: 6
+ Index found at OID: 'ifIndex.1' value: '1'
+ Index found at OID: 'ifIndex.2' value: '2'
+ Index found at OID: 'ifIndex.3' value: '3'
+ Index found at OID: 'ifIndex.4' value: '4'
+ Index found at OID: 'ifIndex.5' value: '5'
+ Index found at OID: 'ifIndex.6' value: '6'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='1'] index: 1 [from value]
+ Found item [ifIndex='2'] index: 2 [from value]
+ Found item [ifIndex='3'] index: 3 [from value]
+ Found item [ifIndex='4'] index: 4 [from value]
+ Found item [ifIndex='5'] index: 5 [from value]
+ Found item [ifIndex='6'] index: 6 [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='Up'] index: 1 [from value]
+ Found item [ifOperStatus='Up'] index: 2 [from value]
+ Found item [ifOperStatus='Up'] index: 3 [from value]
+ Found item [ifOperStatus='Down'] index: 4 [from value]
+ Found item [ifOperStatus='Down'] index: 5 [from value]
+ Found item [ifOperStatus='Down'] index: 6 [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='Host'] index: 1 [from value]
+ Found item [ifDescr='Eth 0'] index: 2 [from value]
+ Found item [ifDescr='Eth 1'] index: 3 [from value]
+ Found item [ifDescr='Eth 2'] index: 4 [from value]
+ Found item [ifDescr='Eth 3'] index: 5 [from value]
+ Found item [ifDescr='Eth 4'] index: 6 [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Found item [ifName='Host'] index: 1 [from value]
+ Found item [ifName='Eth0'] index: 2 [from value]
+ Found item [ifName='Eth1'] index: 3 [from value]
+ Found item [ifName='Eth2'] index: 4 [from value]
+ Found item [ifName='Eth3'] index: 5 [from value]
+ Found item [ifName='Eth4'] index: 6 [from value]
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Found item [ifAlias=''] index: 1 [from value]
+ Found item [ifAlias=''] index: 2 [from value]
+ Found item [ifAlias=''] index: 3 [from value]
+ Found item [ifAlias=''] index: 4 [from value]
+ Found item [ifAlias=''] index: 5 [from value]
+ Found item [ifAlias=''] index: 6 [from value]
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='other(1)'] index: 1 [from value]
+ Found item [ifType='radioMAC(188)'] index: 2 [from value]
+ Found item [ifType='ethernetCsmacd(6)'] index: 3 [from value]
+ Found item [ifType='ethernetCsmacd(6)'] index: 4 [from value]
+ Found item [ifType='ethernetCsmacd(6)'] index: 5 [from value]
+ Found item [ifType='ethernetCsmacd(6)'] index: 6 [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='1000000000'] index: 1 [from value]
+ Found item [ifSpeed='1000'] index: 2 [from value]
+ Found item [ifSpeed='1000000000'] index: 3 [from value]
+ Found item [ifSpeed='0'] index: 4 [from value]
+ Found item [ifSpeed='0'] index: 5 [from value]
+ Found item [ifSpeed='0'] index: 6 [from value]
+ Located input field 'ifHighSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.15'
+ Found item [ifHighSpeed='1000'] index: 1 [from value]
+ Found item [ifHighSpeed='0'] index: 2 [from value]
+ Found item [ifHighSpeed='1000'] index: 3 [from value]
+ Found item [ifHighSpeed='0'] index: 4 [from value]
+ Found item [ifHighSpeed='0'] index: 5 [from value]
+ Found item [ifHighSpeed='0'] index: 6 [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr='00:24:A4:01:47:B0'] index: 1 [from value]
+ Found item [ifHwAddr='00:24:A4:01:47:B1'] index: 2 [from value]
+ Found item [ifHwAddr='00:24:A4:01:47:B2'] index: 3 [from value]
+ Found item [ifHwAddr='00:24:A4:01:47:B3'] index: 4 [from value]
+ Found item [ifHwAddr='00:24:A4:01:47:B4'] index: 5 [from value]
+ Found item [ifHwAddr='00:24:A4:01:47:B5'] index: 6 [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'

I do see some ways to create them, but I'm not sure where to start.

[dameeser]

Hello,

Did you create your template? Care to share it?

Thanks