Spine is selected, but CMDPHP is polling one device

[thirty2]

Hello together,

i am observing a strange issue.

Cacti marked device xxx.xxx as down >

Code: Select all

02/04/2016 09:55:21 AM - SPINE: Poller[0] Host[46] Hostname[xxx.xxx] ERROR: HOST EVENT: Host is DOWN Message: Host did not respond to SNMP, ICMP: Host is Alive

Cacti stopped graphing for that device,

After 10 minutes device is marked as up >

Code: Select all

02/04/2016 10:05:04 AM - SPINE: Poller[0] Host[46] Hostname[xxx.xxx] NOTICE: HOST EVENT: Host Returned from DOWN State

But there are still gaps in graphs. And in Cacti log i can see >

Code: Select all

[i]02/04/2016 10:07:34 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:07:15 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:06:59 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:06:43 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:06:34 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.2.1.1.3.0'
02/04/2016 10:06:27 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:06:12 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx, and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
02/04/2016 10:06:06 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.2.1.1.1.0'
02/04/2016 10:05:56 AM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'xxx.xxx', and OID:'.1.3.6.1.4.1.9.9.109.1.1.1.1.8.1'
[/i]

Cacti start graphing for that device again at 12:10.

Do you have idea what can be a problem?

Thank you