how can change link direction between 2 node from default draw to 90 degree like this picture?
- Sample.png (4.4 KiB) Viewed 1390 times
how can draw link with 2 90 degree angel?
Moderators: Developers, Moderators
how can draw link with 2 90 degree angel?
hi
how can change link direction between 2 node from default draw to 90 degree like this picture? thank's for your help.
how can change link direction between 2 node from default draw to 90 degree like this picture? thank's for your help.
-
Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
Re: how can draw link with 2 90 degree angel?
"VIASTYLE angled" and add two "VIA x y" lines.
(you have to make sure that the x and y make 90 degree angles though - e.g. first x matches node a, second x matches node b, and both y are the same and somewhere between a and b, or the same kind of thing with matching y and x in between)
(you have to make sure that the x and y make 90 degree angles though - e.g. first x matches node a, second x matches node b, and both y are the same and somewhere between a and b, or the same kind of thing with matching y and x in between)
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Re: how can draw link with 2 90 degree angel?
hi howei
thank you for your reply.
that's work well down
thank you for your reply.
that's work well down
Who is online
Users browsing this forum: No registered users and 1 guest