MIBs

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
rmurphy1313
Posts: 1
Joined: Tue Sep 15, 2015 3:06 pm

MIBs

Post by rmurphy1313 »

Hi everyone,

I am really new for MIBs and Oids and the one I have MIB but it doesn't work for the power and device info lines 592 and below. The vendor is APC (American Power Conversion). The mib given to me doesn't work for power so I was hoping someone can send me in the right direction to find the correct MIB /OID to add these into solar winds monitoring correctly.

PowerNet-MIB 6622
1.3.6.1.4.1.318 (apc)
Top
User avatar
um3n
Posts: 39
Joined: Thu Jul 03, 2014 1:35 am

Re: MIBs

Post by um3n »

you could run a snmpwalk for all snmpvalues... so you will get a list for all values... then you should be able to get that MIB you want...
Three tomatoes are walking down the street pappa tomato, mamma tomato, and a little baby tomato.Baby tomato starts lagging behind. Poppa tomato gets angry, goes over to the baby tomato, and smooshes him... and says, "Catch up"
Top
Post Reply

Return to “Help: General”

Who is online

Users browsing this forum: No registered users and 6 guests