Hi
I have Cacti installed on Solaris 10 and i have successfully installed Flowview plugin.
I also installed flowtools to collect netflow data. I can verify netflow data is arriving at the Cacti server
by using tcpdump
# /opt/csw/sbin/tcpdump udp port 2055
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on bge0, link-type EN10MB (Ethernet), capture size 65535 bytes
20:02:22.384563 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:23.385786 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:24.384528 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:25.384639 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:26.386363 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:27.385605 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:28.385700 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:29.389188 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:30.388107 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:31.386843 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:32.385816 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:33.385813 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:34.385787 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:35.386031 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
20:02:36.387916 IP 192.168.9.6.1152 > VNoC-slrs-1.2055: UDP, length 72
^C
15 packets captured
293 packets received by filter
0 packets dropped by kernel
#
My problem is there are no netflow files written into the netflow directory
i specified under "Listeners"
Is there a flowtools daemon that must be running and how do i start it?
Help will be very much appreciated. Thanks
flowtools not storing netflow on Solaris
Moderators: Developers, Moderators
Who is online
Users browsing this forum: No registered users and 1 guest