Problem with inbound in DSSTATS peaks

[DrDLL]

Hello! I have a problem with inbound value in DSSTATS peaks

when i write: TARGET 8*dsstats:weeklypeaktraffic_in:traffic_out I dont have inbound value. Outbound is normal
The same situation with dailypeak (see grafic in attachment)

If i use TARGET 8*dsstatstraffic_in:traffic_out values are normal(but it's current value)

version of wethermap0.97a

/usr/bin/rrdtool create \
/var/www/cacti/rra/56/1801.rrd \
--step 300 \
DS:traffic_out:COUNTER:600:0:1000000000000 \
DS:ds:GAUGE:600:0:4294967295 \
DS:traffic_in:COUNTER:600:0:1000000000000 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \

[DrDLL]

вообщем создал вместо стандартного свой дататемплейт, графтемплейт и в дата запросах SNMP - Interface Statistics привязал новый графтемплейт, после этого пересоздал график с новым graph type и через 2 часа dsstats собрал дневную статистику чтоб отображать ее в везермапе

[Howie]

Have you been running dsstats for a week?

All we're doing is querying the dsstats database tables. If they are empty, then you will have no data.