Graphic Interupts

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
dyordanov
Posts: 6
Joined: Thu Apr 18, 2013 3:25 am

Graphic Interupts

Post by dyordanov »

Hello,

I noticed some of my graphics have strange interrupts, The graphics with this problem are completely random (or I couldn't find any specific connection between them), On the same host, the same way created one of the graphics is ok and the other one looks like this.
graph_image.php.png
graph_image.php.png (24.31 KiB) Viewed 1337 times
graph_image-1.php.png
graph_image-1.php.png (25.77 KiB) Viewed 1337 times
And this one is on the same host working just fine
graph_image-2.php.png
graph_image-2.php.png (20.45 KiB) Viewed 1337 times
I looked at the Cacti Log File and couldn't find anything wrong so far,

We are using cmd.php as a poller every minute
The operating system is Fedora 17 kernel 3.8.4-102.fc17.x86_64
cacti version: 0.8.8a

Any ideas where should I go look next from this point to solve this problem ?
Top
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:
Contact gandalf

Re: Graphic Interupts

Post by gandalf »

What about SYSTEM STATS? Does polling end within time?
R.
Top
dyordanov
Posts: 6
Joined: Thu Apr 18, 2013 3:25 am

Re: Graphic Interupts

Post by dyordanov »

It looks like it ends within time

Code: Select all

04/29/2013 04:10:09 PM - SYSTEM STATS: Time:7.6215 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1085 RRDsProcessed:667
04/29/2013 04:09:11 PM - SYSTEM STATS: Time:9.7320 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1076 RRDsProcessed:666
04/29/2013 04:08:09 PM - SYSTEM STATS: Time:7.2769 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1097 RRDsProcessed:678
04/29/2013 04:07:09 PM - SYSTEM STATS: Time:7.5084 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1082 RRDsProcessed:671
04/29/2013 04:06:09 PM - SYSTEM STATS: Time:8.0669 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1090 RRDsProcessed:671
04/29/2013 04:05:11 PM - SYSTEM STATS: Time:9.3887 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1066 RRDsProcessed:656
04/29/2013 04:04:09 PM - SYSTEM STATS: Time:7.5112 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1096 RRDsProcessed:677
04/29/2013 04:03:10 PM - SYSTEM STATS: Time:9.1414 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1077 RRDsProcessed:667
04/29/2013 04:02:11 PM - SYSTEM STATS: Time:8.9248 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1102 RRDsProcessed:682
04/29/2013 04:01:09 PM - SYSTEM STATS: Time:7.6452 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1070 RRDsProcessed:660
04/29/2013 04:00:09 PM - SYSTEM STATS: Time:7.9322 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1086 RRDsProcessed:667
04/29/2013 03:59:08 PM - SYSTEM STATS: Time:6.5162 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1076 RRDsProcessed:666
04/29/2013 03:58:08 PM - SYSTEM STATS: Time:6.7474 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1097 RRDsProcessed:678
04/29/2013 03:57:10 PM - SYSTEM STATS: Time:8.6103 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1082 RRDsProcessed:671
04/29/2013 03:56:08 PM - SYSTEM STATS: Time:6.3167 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1090 RRDsProcessed:671
04/29/2013 03:55:08 PM - SYSTEM STATS: Time:7.2702 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1066 RRDsProcessed:656
04/29/2013 03:54:11 PM - SYSTEM STATS: Time:9.2905 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1096 RRDsProcessed:677
04/29/2013 03:53:09 PM - SYSTEM STATS: Time:7.7348 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1077 RRDsProcessed:667
04/29/2013 03:52:09 PM - SYSTEM STATS: Time:7.4685 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1102 RRDsProcessed:682
04/29/2013 03:51:10 PM - SYSTEM STATS: Time:9.1974 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1070 RRDsProcessed:660
04/29/2013 03:50:10 PM - SYSTEM STATS: Time:7.8973 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1086 RRDsProcessed:667
04/29/2013 03:49:10 PM - SYSTEM STATS: Time:9.6082 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1076 RRDsProcessed:666
04/29/2013 03:48:09 PM - SYSTEM STATS: Time:7.8883 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1097 RRDsProcessed:678
04/29/2013 03:47:08 PM - SYSTEM STATS: Time:7.1203 Method:cmd.php Processes:30 Threads:N/A Hosts:47 HostsPerProcess:2 DataSources:1082 RRDsProcessed:671
Top
User avatar
gandalf
Developer
Posts: 22383
Joined: Thu Dec 02, 2004 2:46 am
Location: Muenster, Germany
Contact:
Contact gandalf

Re: Graphic Interupts

Post by gandalf »

Yep, that's fine. When running latest spine in verbosity 3 (medium), polling times per host should be added to cacti.log. Please post snippets of the log (as few as possible) that show what happens during one of those outages
R.
Top
dyordanov
Posts: 6
Joined: Thu Apr 18, 2013 3:25 am

Re: Graphic Interupts

Post by dyordanov »

Hello,
I decided to change to poller type to spine to see what happens - no luck.
I took one of the graphs for a 10 minute interval where there is some outages like this and here are the logs:

Code: Select all

05/14/2013 12:30:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.79, value: 41580369
05/14/2013 12:30:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.79, value: 24617832
05/14/2013 12:32:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.79, value: 41580723
05/14/2013 12:32:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.79, value: 24618150
05/14/2013 12:34:01 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.79, value: 41581089
05/14/2013 12:34:01 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.79, value: 24618428
05/14/2013 12:36:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.79, value: 41581509
05/14/2013 12:36:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.79, value: 24618666
05/14/2013 12:38:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.79, value: 41581719
05/14/2013 12:38:02 PM - SPINE: Poller[0] Host[3] TH[1] DS[1795] SNMP: v2: 10.10.11.52, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.79, value: 24618864

Code: Select all

05/14/2013 12:30:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.12 Seconds
05/14/2013 12:31:01 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:   0.2 Seconds
05/14/2013 12:32:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.39 Seconds
05/14/2013 12:33:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.49 Seconds
05/14/2013 12:34:01 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.32 Seconds
05/14/2013 12:35:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.24 Seconds
05/14/2013 12:36:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.55 Seconds
05/14/2013 12:37:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.56 Seconds
05/14/2013 12:38:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time: 0.099 Seconds
05/14/2013 12:39:02 PM - SPINE: Poller[0] Host[3] TH[1] Total Time:  0.15 Seconds

The dump of the rrd file:

Code: Select all

<!-- 2013-05-14 12:30:00 EEST / 1368523800 --> <row><v>2.4750000000e+00</v><v>2.4872589532e+00</v></row>
<!-- 2013-05-14 12:32:00 EEST / 1368523920 --> <row><v>2.6689810924e+00</v><v>2.9668767507e+00</v></row>
<!-- 2013-05-14 12:34:00 EEST / 1368524040 --> <row><v>2.3196300187e+00</v><v>3.0493732493e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>1.9861111111e+00</v><v>3.4962500000e+00</v></row>
<!-- 2013-05-14 12:38:00 EEST / 1368524280 --> <row><v>NaN</v><v>1.7502410468e+00</v></row>
<!-- 2013-05-14 12:30:00 EEST / 1368523800 --> <row><v>2.4750000000e+00</v><v>2.4872589532e+00</v></row>
<!-- 2013-05-14 12:32:00 EEST / 1368523920 --> <row><v>2.6689810924e+00</v><v>2.9668767507e+00</v></row>
<!-- 2013-05-14 12:34:00 EEST / 1368524040 --> <row><v>2.3196300187e+00</v><v>3.0493732493e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>1.9861111111e+00</v><v>3.4962500000e+00</v></row>
<!-- 2013-05-14 12:38:00 EEST / 1368524280 --> <row><v>NaN</v><v>1.7502410468e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>2.6846921102e+00</v><v>3.1699871615e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>2.4524714441e+00</v><v>3.1953621140e+00</v></row>
<!-- 2013-05-14 12:30:00 EEST / 1368523800 --> <row><v>2.4750000000e+00</v><v>2.4872589532e+00</v></row>
<!-- 2013-05-14 12:32:00 EEST / 1368523920 --> <row><v>2.6689810924e+00</v><v>2.9668767507e+00</v></row>
<!-- 2013-05-14 12:34:00 EEST / 1368524040 --> <row><v>2.3196300187e+00</v><v>3.0493732493e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>1.9861111111e+00</v><v>3.4962500000e+00</v></row>
<!-- 2013-05-14 12:38:00 EEST / 1368524280 --> <row><v>NaN</v><v>1.7502410468e+00</v></row>
<!-- 2013-05-14 12:30:00 EEST / 1368523800 --> <row><v>2.4750000000e+00</v><v>2.4872589532e+00</v></row>
<!-- 2013-05-14 12:32:00 EEST / 1368523920 --> <row><v>2.6689810924e+00</v><v>2.9668767507e+00</v></row>
<!-- 2013-05-14 12:34:00 EEST / 1368524040 --> <row><v>2.3196300187e+00</v><v>3.0493732493e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>1.9861111111e+00</v><v>3.4962500000e+00</v></row>
<!-- 2013-05-14 12:38:00 EEST / 1368524280 --> <row><v>NaN</v><v>1.7502410468e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>3.9737383287e+00</v><v>5.2551313025e+00</v></row>
<!-- 2013-05-14 12:36:00 EEST / 1368524160 --> <row><v>3.9737383287e+00</v><v>5.5988888889e+00</v></row>
and the info of the rrd file

Code: Select all

rrd_version = "0003"
step = 120
last_update = 1368527162
header_size = 3488
ds[traffic_in].index = 0
ds[traffic_in].type = "DERIVE"
ds[traffic_in].minimal_heartbeat = 120
ds[traffic_in].min = 0.0000000000e+00
ds[traffic_in].max = 1.0000000000e+09
ds[traffic_in].last_ds = "24625159"
ds[traffic_in].value = 3.9666666667e+00
ds[traffic_in].unknown_sec = 0
ds[traffic_out].index = 1
ds[traffic_out].type = "DERIVE"
ds[traffic_out].minimal_heartbeat = 240
ds[traffic_out].min = 0.0000000000e+00
ds[traffic_out].max = 1.0000000000e+09
ds[traffic_out].last_ds = "41589765"
ds[traffic_out].value = 4.4333333333e+00
ds[traffic_out].unknown_sec = 0
rra[0].cf = "AVERAGE"
rra[0].rows = 500
rra[0].cur_row = 403
rra[0].pdp_per_row = 1
rra[0].xff = 5.0000000000e-01
rra[0].cdp_prep[0].value = NaN
rra[0].cdp_prep[0].unknown_datapoints = 0
rra[0].cdp_prep[1].value = NaN
rra[0].cdp_prep[1].unknown_datapoints = 0
rra[1].cf = "AVERAGE"
rra[1].rows = 600
rra[1].cur_row = 565
rra[1].pdp_per_row = 1
rra[1].xff = 5.0000000000e-01
rra[1].cdp_prep[0].value = NaN
rra[1].cdp_prep[0].unknown_datapoints = 0
rra[1].cdp_prep[1].value = NaN
rra[1].cdp_prep[1].unknown_datapoints = 0
rra[2].cf = "AVERAGE"
rra[2].rows = 700
rra[2].cur_row = 510
rra[2].pdp_per_row = 6
rra[2].xff = 5.0000000000e-01
rra[2].cdp_prep[0].value = 1.9833333333e+00
rra[2].cdp_prep[0].unknown_datapoints = 0
rra[2].cdp_prep[1].value = 2.2659481175e+00
rra[2].cdp_prep[1].unknown_datapoints = 0
rra[3].cf = "AVERAGE"
rra[3].rows = 775
rra[3].cur_row = 372
rra[3].pdp_per_row = 24
rra[3].xff = 5.0000000000e-01
rra[3].cdp_prep[0].value = 1.9833333333e+00
rra[3].cdp_prep[0].unknown_datapoints = 0
rra[3].cdp_prep[1].value = 2.2659481175e+00
rra[3].cdp_prep[1].unknown_datapoints = 0
rra[4].cf = "AVERAGE"
rra[4].rows = 797
rra[4].cur_row = 438
rra[4].pdp_per_row = 288
rra[4].xff = 5.0000000000e-01
rra[4].cdp_prep[0].value = 2.5366643849e+02
rra[4].cdp_prep[0].unknown_datapoints = 50
rra[4].cdp_prep[1].value = 4.9635576905e+02
rra[4].cdp_prep[1].unknown_datapoints = 8
rra[5].cf = "MAX"
rra[5].rows = 500
rra[5].cur_row = 362
rra[5].pdp_per_row = 1
rra[5].xff = 5.0000000000e-01
rra[5].cdp_prep[0].value = NaN
rra[5].cdp_prep[0].unknown_datapoints = 0
rra[5].cdp_prep[1].value = NaN
rra[5].cdp_prep[1].unknown_datapoints = 0
rra[6].cf = "MAX"
rra[6].rows = 600
rra[6].cur_row = 94
rra[6].pdp_per_row = 1
rra[6].xff = 5.0000000000e-01
rra[6].cdp_prep[0].value = NaN
rra[6].cdp_prep[0].unknown_datapoints = 0
rra[6].cdp_prep[1].value = NaN
rra[6].cdp_prep[1].unknown_datapoints = 0
rra[7].cf = "MAX"
rra[7].rows = 700
rra[7].cur_row = 124
rra[7].pdp_per_row = 6
rra[7].xff = 5.0000000000e-01
rra[7].cdp_prep[0].value = 1.9833333333e+00
rra[7].cdp_prep[0].unknown_datapoints = 0
rra[7].cdp_prep[1].value = 2.2659481175e+00
rra[7].cdp_prep[1].unknown_datapoints = 0
rra[8].cf = "MAX"
rra[8].rows = 775
rra[8].cur_row = 571
rra[8].pdp_per_row = 24
rra[8].xff = 5.0000000000e-01
rra[8].cdp_prep[0].value = 1.9833333333e+00
rra[8].cdp_prep[0].unknown_datapoints = 0
rra[8].cdp_prep[1].value = 2.2659481175e+00
rra[8].cdp_prep[1].unknown_datapoints = 0
rra[9].cf = "MAX"
rra[9].rows = 797
rra[9].cur_row = 368
rra[9].pdp_per_row = 288
rra[9].xff = 5.0000000000e-01
rra[9].cdp_prep[0].value = 3.9737383287e+00
rra[9].cdp_prep[0].unknown_datapoints = 50
rra[9].cdp_prep[1].value = 8.3078053260e+00
rra[9].cdp_prep[1].unknown_datapoints = 8

I guess this "NaN" values written in the rrd file are the problem, but I don't know why there is "NaN" considering the poller is getting values every time
Top
dyordanov
Posts: 6
Joined: Thu Apr 18, 2013 3:25 am

Re: Graphic Interupts

Post by dyordanov »

After digging abit more I think I might found the problem,
the heartbeat for traffic_in of this datasource seems incorrect, I will try to increase it to 240 and see what happens
Top
User avatar
camerabob
Cacti User
Posts: 386
Joined: Fri Feb 10, 2017 2:45 pm
Location: Long Island, New York, USA
Contact:
Contact camerabob

Re: Graphic Interupts

Post by camerabob »

Still? This is your first post on a 7 year old thread. Please start a new one and give some details.
Prod: Cacti 1.2.15 @ CentOS Linux release 7.9.2009 (Core) & PHP 5.4.16-48.el7
Maint @ 1.2
Monitor @ 2.3.6
Thold @ 1.2.4

Temp: Cacti 1.2.3 @ CentOS Linux release 7.9.2009 (Core) & PHP 5.4.16-48.el7
Flowview @ 2.1
Mactrack @ 4.2
Maint @ 1.2
Monitor @ 2.3.6
Router Configs @ 1.3.4
Syslog Monitoring @ 2.1
Thold @ 1.2.4
Top
User avatar
Osiris
Cacti Guru User
Posts: 1424
Joined: Mon Jan 05, 2015 10:10 am

Re: Graphic Interupts

Post by Osiris »

Totally with that.
Before history, there was a paradise, now dust.
Top
Post Reply

Return to “Help: General”

Who is online

Users browsing this forum: No registered users and 0 guests