SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]

[shumalatif]

Hallo,

I have a problem log in cacti.

I look at the Cacti Log File are as below

Code: Select all

03/28/2013 09:55:11 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.3.4.1.2.14.113.117.101.117.101.115.95.98.121.95.116.121.112.101.1'
03/28/2013 09:55:10 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.1.4.1.2.10.99.97.99.104.101.95.104.105.116.115.1'
03/28/2013 09:55:10 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.4.4.1.2.18.97.110.115.119.101.114.115.95.116.111.95.113.117.101.114.105.101.115.1'
03/28/2013 09:55:09 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.6.4.1.2.15.113.117.101.117.101.115.95.98.121.95.102.108.97.103.115.1'
03/28/2013 09:55:08 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.2.4.1.2.12.109.101.109.111.114.121.95.117.115.97.103.101.1'
03/28/2013 09:55:08 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.7.4.1.2.11.114.101.113.117.101.115.116.108.105.115.116.1'
03/28/2013 09:55:07 AM - SPINE: Poller[0] Host[238] ERROR: Empty result [x.x.x.x]: '/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.5.4.1.2.9.104.105.115.116.111.103.114.97.109.1'
03/28/2013 09:55:01 AM - POLLER: Poller[0] ERROR: The path: /usr/local/bin/spine/spine is invalid. Can not continue

Has anyone experienced it?

how to fix it?

[shumalatif]

how to fix it greatingz?

Can you share with me?

[phalek]

What does this command return if you call it from the command line ?

Code: Select all

/usr/local/bin/snmpget -v2c -Ovqa -c monitor x.x.x.x .1.3.6.1.3.1983.1.3.4.1.2.14.113.117.101.117.101.115.95.98.121.95.116.121.112.101.1

Also check your spine config/setup. As it states:

Code: Select all

03/28/2013 09:55:01 AM - POLLER: Poller[0] ERROR: The path: /usr/local/bin/spine/spine is invalid. Can not continue

[shumalatif]

I direct the Spine Poller File Path to / usr / local / bin / spine



and I set the permissions as below

Code: Select all

$ ls -al /usr/local/bin/spine
-rwxr-xr-x  1 www  www  243266 Mar 26 19:16 /usr/local/bin/spine

i use nginx and php-fpm with user and group www:www

Code: Select all

/* File php-fpm.conf
...
listen.owner = www
listen.group = www
listen.mode = 0666
user = www
group = www
...

what there is something wrong with my config or permissions from file?

[phalek]

Than this was just some odd log message ... nevertheless, what do the SNMP commands return if you call them from your CLI ?