Problems after upgrading from 0.8.7i to 0.8.8a

[aboord]

Hi there!

I've tried googling, via IRC, mail list and haven't found any help, so I guess the forum is my last bullet

I've been using cacti 0.8.7i, it had no errors, no problems, everything was working fine. But I didn't find the PIA addon for this version so I decided upgrading to version 0.8.8a as I knew it has the PIA addon by default.

I followed this page step-by-step to do it: http://www.cacti.net/downloads/docs/html/upgrade.html

After doing it, I cannot see any graph! All of them appear as a broken images. When I upgraded, I had to reset the spine path to /usr/sbin/spine, as it appeared blank, but I think the rest of the configuration is ok.

In the logs I only could see this in cacti.log:

Code: Select all

07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 upgrade table poller_item
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 table poller_output: dropping old PRIMARY KEY
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 upgrade table poller_output
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 upgrade table user_log
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 install table plugin_config
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 install table plugin_db_changes
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 install table plugin_hooks
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 install table plugin_realms
07/01/2012 01:15:40 AM - UPGRADE: Poller[0] upgrade_to_0_8_8 upgrade table data_template_data
07/01/2012 01:16:10 AM - AUTH LOGIN: User 'admin' Authenticated
07/01/2012 01:20:01 AM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval!  The Poller Interval is '300' seconds, with a maximum of a '300' second Cron, but 599 seconds have passed since the last poll!
07/01/2012 01:20:02 AM - SYSTEM STATS: Time:0.6519 Method:spine Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:40 RRDsProcessed:27
07/01/2012 01:25:02 AM - SYSTEM STATS: Time:0.5627 Method:spine Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:40 RRDsProcessed:27
07/01/2012 01:30:01 AM - SYSTEM STATS: Time:0.5376 Method:spine Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:40 RRDsProcessed:27
07/01/2012 01:35:02 AM - SYSTEM STATS: Time:0.5998 Method:spine Processes:1 Threads:1 Hosts:3 HostsPerProcess:3 DataSources:40 RRDsProcessed:27

And so on, I understand there are not further errors after upgrading. But in poller-error.log I see a lot of lines like these:

Code: Select all

Cannot adopt OID in NET-SNMP-AGENT-MIB: nsLogLevel ::= { nsLoggingEntry 1 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendResult ::= { nsExtendOutput1Entry 4 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutNumLines ::= { nsExtendOutput1Entry 3 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutputFull ::= { nsExtendOutput1Entry 2 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutput1Line ::= { nsExtendOutput1Entry 1 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutLine ::= { nsExtendOutput2Entry 2 }
Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendLineIndex ::= { nsExtendOutput2Entry 1 }
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyStart ::= { netSnmpNotifications 1 }
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyShutdown ::= { netSnmpNotifications 2 }
Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyRestart ::= { netSnmpNotifications 3 }
Cannot adopt OID in UCD-SNMP-MIB: laErrMessage ::= { laEntry 101 }
Cannot adopt OID in UCD-SNMP-MIB: laErrorFlag ::= { laEntry 100 }
Cannot adopt OID in UCD-SNMP-MIB: laLoadFloat ::= { laEntry 6 }
Cannot adopt OID in UCD-SNMP-MIB: laLoadInt ::= { laEntry 5 }
Cannot adopt OID in UCD-SNMP-MIB: laConfig ::= { laEntry 4 }
Cannot adopt OID in UCD-SNMP-MIB: laLoad ::= { laEntry 3 }
Cannot adopt OID in UCD-SNMP-MIB: laNames ::= { laEntry 2 }
Cannot adopt OID in UCD-SNMP-MIB: laIndex ::= { laEntry 1 }

So I assume there's the error. Could someone tell me how to solve this? I'm trying to look for some info but I see nothing about this... I remark everything was working well with the previous version and I guess it's not a client issue as I cannot monitor the localhost either.

Thank you very much!

[paulgevers]

Seems like you have two problems:
1) graphs not showing
2) Poller problems

ad 2) Have you tried running cmd.php instead of spine? I don't expect it matters, but anyway.
ad 1) If you turn on debugging (top right corner) in graph management screen, what does rrdtool tell you?

[gandalf]

The "cannot adopt OID" thingies are related to your set of MIB files, which seem to be mssing some dependencies. That's not Cacti related; we indeed do not use MIBs but plain numeric OIDs. So, apart from waisting time to resolve the unneeded, no harm done.
R.