Cisco VPN 3000 concentrator - No Graphs

[opers13]

I can add the device via SNMP, but can't get graphs to work. I downloaded the "cacti host template cisco vpn 3000.xml" template and added the associated graph templates. I'm using snmp v1, it seems to work better than snmp v2, thats because when I click on "verbose query" I get more info with v1 than v2.

SNMP Walk doesn't display any info at all. Really hoping to get IPSec tunnel information via Cacti (0.8.7c)

Any idea??

thanks


v1- Data Query Debug:

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ Index found at OID: '1.3.6.1.2.1.2.2.1.1.1' value: '1'
+ Index found at OID: '1.3.6.1.2.1.2.2.1.1.2' value: '2'
+ Located input field 'ifIndex' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.1'
+ Found item [ifIndex='1'] index: 1 [from value]
+ Found item [ifIndex='2'] index: 2 [from value]
+ Located input field 'ifOperStatus' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.8'
+ Found item [ifOperStatus='Up'] index: 1 [from value]
+ Found item [ifOperStatus='Up'] index: 2 [from value]
+ Located input field 'ifDescr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.2'
+ Found item [ifDescr='DEC 21143A PCI Fast Ethernet'] index: 1 [from value]
+ Found item [ifDescr='DEC 21143A PCI Fast Ethernet'] index: 2 [from value]
+ Located input field 'ifName' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.1'
+ Found item [ifName=''] index: 1 [from value]
+ Found item [ifName=''] index: 2 [from value]
+ Located input field 'ifAlias' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.31.1.1.1.18'
+ Found item [ifAlias=''] index: 1 [from value]
+ Found item [ifAlias=''] index: 2 [from value]
+ Located input field 'ifType' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.3'
+ Found item [ifType='ethernetCsmacd(6)'] index: 1 [from value]
+ Found item [ifType='ethernetCsmacd(6)'] index: 2 [from value]
+ Located input field 'ifSpeed' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.5'
+ Found item [ifSpeed='100000000'] index: 1 [from value]
+ Found item [ifSpeed='100000000'] index: 2 [from value]
+ Located input field 'ifHwAddr' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.2.2.1.6'
+ Found item [ifHwAddr='00:00:03:A0:89:6D:FA'] index: 1 [from value]
+ Found item [ifHwAddr='00:00:03:A0:89:6D:FB'] index: 2 [from value]
+ Located input field 'ifIP' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.2.1.4.20.1.2'
+ Found item [ifIP='10.153.251.6'] index: 1 [from regexp oid parse]
+ Found item [ifIP='155.41.95.13'] index: 2 [from regexp oid parse]
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'

v.2 Data query debug:

+ Running data query [1].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.2.2.1.1'
+ No SNMP data returned
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'
+ Found data query XML file at '/var/www/html/resource/snmp_queries/interface.xml'

[gandalf]

In case the device is configured to answer V1 requests only, this is expected. You may run an snmpwalk from command line to verify
R.