Idirect connectivity with Cacti.
Moderators: Developers, Moderators
Idirect connectivity with Cacti.
How I add Idirect modems in cacti, my cacti is runing with centos. I am nt sure about the OID & community.
- gandalf
- Developer
- Posts: 22383
- Joined: Thu Dec 02, 2004 2:46 am
- Location: Muenster, Germany
- Contact:
Re: Idirect connectivity with Cacti.
That's bad. To retrieve information via SNMP (recommended), this information is required. Without == nogo
R.
R.
Re: Idirect connectivity with Cacti.
Hi Hkarim,
Couple of things to guide you in the right direction.
1: Depending on your idirect package version - you will 90% not be able to get SNMP info from the modem itself. iDirect has set it up so that all that goes to the NMS.
You can pull that info from the NMS but you will need access to it - usually via VPN.
Once you get access you will need to read this thread
http://forums.cacti.net/viewtopic.php?f=21&t=28863
There is some templates and Thuo made a great data source template for all OID's.
Good Luck.
Couple of things to guide you in the right direction.
1: Depending on your idirect package version - you will 90% not be able to get SNMP info from the modem itself. iDirect has set it up so that all that goes to the NMS.
You can pull that info from the NMS but you will need access to it - usually via VPN.
Once you get access you will need to read this thread
http://forums.cacti.net/viewtopic.php?f=21&t=28863
There is some templates and Thuo made a great data source template for all OID's.
Good Luck.
++++++ Cacti Newbie ++++++++++++++++++++++++++++++++++++++++++
Cacti 0.8.8f with PIA on a Centos6 VM
Plugins Used: Infopage | RouterConfigs | Spikekill | BOOST | REALTIME | CLOG
Cacti 0.8.8f with PIA on a Centos6 VM
Plugins Used: Infopage | RouterConfigs | Spikekill | BOOST | REALTIME | CLOG
Who is online
Users browsing this forum: No registered users and 0 guests