I have a snmp installed ubuntu laptop that I have a script counts output packets from machin. I made the snmpd.conf to execute the script and the snmpwalk output is shown below
$ snmpwalk -v 2c -c public localhost .1.3.6.1.2.2014.40.4
********************************************************************************************
Cannot adopt OID in UCD-SNMP-MIB: laErrMessage ::= { laEntry 101 }
Cannot adopt OID in UCD-SNMP-MIB: laErrorFlag ::= { laEntry 100 }
Cannot adopt OID in UCD-SNMP-MIB: laLoadFloat ::= { laEntry 6 }
Cannot adopt OID in UCD-SNMP-MIB: laLoadInt ::= { laEntry 5 }
Cannot adopt OID in UCD-SNMP-MIB: laConfig ::= { laEntry 4 }
Cannot adopt OID in UCD-SNMP-MIB: laLoad ::= { laEntry 3 }
Cannot adopt OID in UCD-SNMP-MIB: laNames ::= { laEntry 2 }
Cannot adopt OID in UCD-SNMP-MIB: laIndex ::= { laEntry 1 }
iso.3.6.1.2.2014.40.4.1.0 = INTEGER: 1
iso.3.6.1.2.2014.40.4.2.1.2.11.116.114.97.102.102.105.99.95.111.117.116 = STRING: "/bin/bash"
iso.3.6.1.2.2014.40.4.2.1.3.11.116.114.97.102.102.105.99.95.111.117.116 = STRING: "/home/snmp_test/iptables_traffic_eval.sh out"
iso.3.6.1.2.2014.40.4.2.1.4.11.116.114.97.102.102.105.99.95.111.117.116 = ""
iso.3.6.1.2.2014.40.4.2.1.5.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 5
iso.3.6.1.2.2014.40.4.2.1.6.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 1
iso.3.6.1.2.2014.40.4.2.1.7.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 1
iso.3.6.1.2.2014.40.4.2.1.20.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 4
iso.3.6.1.2.2014.40.4.2.1.21.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 1
iso.3.6.1.2.2014.40.4.3.1.1.11.116.114.97.102.102.105.99.95.111.117.116 = STRING: "9483815"
iso.3.6.1.2.2014.40.4.3.1.2.11.116.114.97.102.102.105.99.95.111.117.116 = STRING: "9483815
0"
iso.3.6.1.2.2014.40.4.3.1.3.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 2
iso.3.6.1.2.2014.40.4.3.1.4.11.116.114.97.102.102.105.99.95.111.117.116 = INTEGER: 0
iso.3.6.1.2.2014.40.4.4.1.2.11.116.114.97.102.102.105.99.95.111.117.116.1 = STRING: "9483815"
iso.3.6.1.2.2014.40.4.4.1.2.11.116.114.97.102.102.105.99.95.111.117.116.2 = STRING: "0"
******************************************************************************************************************
For creating a graph with cacti, after creating a localhost device and make it snmp version 2 enabled, in the new graph section, I get the SNMP-GENERIC OID TEMPLATE and entered the .1.3.6.1.2.2014.40.4 OID init. After saving, the rrdtools said me OK and gave me an empty graph, now the problem is the graph is still empty!!!!!
just for make sure that there is no permission problem, I setted the rra and log folders permission to 777 and it still is empty
here is my log/cacti.log output :
***************************************************************************************************************************
09/27/2011 03:15:02 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:15:02 PM - SYSTEM STATS: Time:0.2222 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:20:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:20:01 PM - SYSTEM STATS: Time:0.2206 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:25:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:25:01 PM - SYSTEM STATS: Time:0.2222 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:30:02 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:30:02 PM - SYSTEM STATS: Time:0.2232 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:35:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:35:01 PM - SYSTEM STATS: Time:0.2179 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:40:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:40:01 PM - SYSTEM STATS: Time:0.2200 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:45:02 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:45:02 PM - SYSTEM STATS: Time:0.2212 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:50:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:50:01 PM - SYSTEM STATS: Time:0.2133 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 03:55:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 03:55:01 PM - SYSTEM STATS: Time:0.2222 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 04:00:02 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 04:00:02 PM - SYSTEM STATS: Time:0.2209 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
09/27/2011 04:05:01 PM - CMDPHP: Poller[0] Host[1] DS[8] WARNING: Result from SNMP not valid. Partial Result: U
09/27/2011 04:05:01 PM - SYSTEM STATS: Time:0.2171 Method:cmd.php Processes:1 Threads:N/A Hosts:2 HostsPerProcess:2 DataSources:6 RRDsProcessed:6
***********************************************************************************************************************************
that is saying my snmp out put is wrong, but you see the output of snmpwalk if it is wrong . . . .
So any body can help me to fix it please ?
