We are hitting an issue on 95th Percentile calculation. Our problem is that we are getting a value of 95th Percentile larger than the maximum bandwidth. We then tried to adjust the value from |95:bits:0:total:2| to |95:bits:0:max:2|(We had been using "total" for years already, but this problem just popped out all at a sudden), and this helps.
However, if we add new graphs, we hit another issue of getting a 0 mbits of 95th Percentile result, which is apparently incorrect. We checked out forums and seems like people had this issue before.
http://forums.cacti.net/about9610.html
It mentioned there's a patch, but we couldn't find. We are using version 0.8.7e already. This is so frustrating. Can somebody give us a help?
Thank you very very much.
95th Percentile incorrect calculation
Moderators: Developers, Moderators
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Re: 95th Percentile incorrect calculation
The next release, released today, addresses this issue.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
Who is online
Users browsing this forum: No registered users and 2 guests