Enterasys E N S and K series CPU utilization template

[gen2]

The OID instance number has changed as of Enterasys FW 7.0 for the E N S and K series. Here's a new SNMP query and templates for these devices. These will work on multi-slot E and N series e.g. N7, E5, E7. They've also been tested on the SSA (S stand alone). The mib structure is the same for the K series so when those become available it will work for that series as well. I'm also hoping to test this on multi-slot S-series soon. If you have S3, S4, S8 I'd like to know if this works.


Installation information can be found at http://coreflow.org/?p=185

Tested on:
Enterasys FW >= 7.0 for the
E series matrix chassis running N-series gen 4 blades Platinum or Diamond
N series 1,3,5, 7 slot varieties
S series SSA (S stand alone)

Expected to work, but not yet tested:
S series S3, S4, S8
K series K6, K10

[Keithi]

I've copied the files to the snmp_queries directory and loaded the data and graph templates. I've created the graphs for my N7 version 7 router in cacti. However, cacti cannot locate the rrd file because it never gets created. The instructions say to load the host template but there is not one in the .zip file. Another thing, "|query_slot|" variable is not translating for some reason. I have several N and S series and this template would really help me out.


RRDTool Command:
/usr/local/rrdtool/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title='Moody Star N7 - Enterasys CPU Slot |query_slot|' \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label='CPU load %' \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/www/html/cacti/rra/5/878.rrd":cpuLoad5min:AVERAGE \
DEF:b="/var/www/html/cacti/rra/5/878.rrd":cpuLoad1min:AVERAGE \
DEF:c="/var/www/html/cacti/rra/5/878.rrd":cpuLoad5sec:AVERAGE \
CDEF:cdefa=a,10,/ \
CDEF:cdefe=b,10,/ \
CDEF:cdefi=c,10,/ \
AREA:cdefa#A150AACC:"5 min" \
GPRINT:cdefa:LAST:"Current\:%8.0lf" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Max\:%8.0lf\n" \
LINE2:cdefe#FFF200FF:"1 min" \
GPRINT:cdefe:LAST:"Current\:%8.0lf" \
GPRINT:cdefe:AVERAGE:"Average\:%8.0lf" \
GPRINT:cdefe:MAX:"Max\:%8.0lf\n" \
LINE1:cdefi#CDCFC4CC:"5 sec" \
GPRINT:cdefi:LAST:"Current\:%8.0lf" \
GPRINT:cdefi:AVERAGE:"Average\:%8.0lf" \
GPRINT:cdefi:MAX:"Max\:%8.0lf\n"
RRDTool Says:
ERROR: opening '/var/www/html/cacti/rra/5/878.rrd': No such file or directory

[gandalf]

This looks very much like the poller is not able to get SNMP data from that device. Please see 2nd link of my sig to find out, how the host is handled during polling
R.

[fanrazy]

Hello

is this template compatible with catci version Version 0.8.7c? If not what can i do to run this template in my catcti version for an enterasys S8 series ?



Thanks in advance