Juniper rpm

[ognjen]

Hi guys

i am wondering if anyone can help, i downloaded and installed juniper-rpm template i found on the forum. Installation was smooth easy and no errors, but the graph show nan values. If i check my log i can see that i am getting data but the graph never get updated. Any help on this is appreciated.
url for juniper-rpm template http://forums.cacti.net/post-196315.html. My log shows the following:

03/23/2011 05:50:52 PM - CMDPHP: Poller[0] Host[9] DS[3374] CMD: /usr/bin/perl /var/www/html/cacti/scripts/juniper-rpm.pl ip public get jitter JB-ID-MSC-MX-to-CT-RO-MSC-M.ICMP, output: U
03/23/2011 05:50:52 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/www/html/cacti/rra/jb-id-msc-mx_avaragertt_3374.rrd --template avaragertt:jitter 1300895433:U:U
03/23/2011 05:55:51 PM - CMDPHP: Poller[0] Host[9] DS[3374] CMD: /usr/bin/perl /var/www/html/cacti/scripts/juniper-rpm.pl ip public get jitter JB-ID-MSC-MX-to-CT-RO-MSC-M.ICMP, output: U
03/23/2011 05:55:51 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/www/html/cacti/rra/jb-id-msc-mx_avaragertt_3374.rrd --template avaragertt:jitter 1300895733:U:U
03/23/2011 06:00:49 PM - CMDPHP: Poller[0] Host[9] DS[3374] CMD: /usr/bin/perl /var/www/html/cacti/scripts/juniper-rpm.pl ip public get jitter JB-ID-MSC-MX-to-CT-RO-MSC-M.ICMP, output: U
03/23/2011 06:00:49 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/www/html/cacti/rra/jb-id-msc-mx_avaragertt_3374.rrd --template jitter:avaragertt 1300896033:U:U

[gandalf]

Please post this question to the thread that published this template
R.

[ognjen]

Sorry about that i moved it in there.