Hi,
CACTI Graph is start showing from the baselike (X-Axis) once interface traffic goes beyond 550Mbps.
Please help me to have this addressed asap as i have lots of links with > 560Mbps traffic.
Gigabit interface graph problem after ~560Mbps traffic
Moderators: Developers, Moderators
Gigabit interface graph problem after ~560Mbps traffic
- Attachments
-
- Problematic graph.jpg (33.83 KiB) Viewed 596 times
-
rony
- Developer/Forum Admin
- Posts: 6022
- Joined: Mon Nov 17, 2003 6:35 pm
- Location: Michigan, USA
- Contact:
Re: Gigabit interface graph problem after ~560Mbps traffic
Make sure you are using SNMPv2 and 64-bit counters for these interfaces.
[size=117][i][b]Tony Roman[/b][/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
[size=84][i]Experience is what causes a person to make new mistakes instead of old ones.[/i][/size]
[size=84][i]There are only 3 way to complete a project: Good, Fast or Cheap, pick two.[/i][/size]
[size=84][i]With age comes wisdom, what you choose to do with it determines whether or not you are wise.[/i][/size]
-
gandalf
- Developer
- Posts: 22383
- Joined: Thu Dec 02, 2004 2:46 am
- Location: Muenster, Germany
- Contact:
Re: Gigabit interface graph problem after ~560Mbps traffic
This is 1 minute polling, then?ajayv wrote:Hi,
CACTI Graph is start showing from the baselike (X-Axis) once interface traffic goes beyond 550Mbps.
Please help me to have this addressed asap as i have lots of links with > 560Mbps traffic.
R.
Who is online
Users browsing this forum: No registered users and 2 guests