No User Ports Up/Active Macs

[scruboy01]

Just completed a new isntall of Cacti and mactrack. Have been using the older versions, but haven't upgraded in a while. Added 4 devices (2 dist. switches and 2 access switches). The devices page is showing IPs and User Ports but no User Ports Up or Active Macs. A select * from mac_track_ports shows no rows. There are no errors from running the poller manually except for some PHP Warnings. Any help would be appreciated.

Code: Select all

[root@slgramidluber01 mactrack]# php poller_mactrack.php -sid=2
PHP Warning:  PHP Startup: fileinfo: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  Module 'readline' already loaded in Unknown on line 0
PHP Warning:  PHP Startup: fileinfo: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: fileinfo: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: fileinfo: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  Module 'readline' already loaded in Unknown on line 0
PHP Warning:  Module 'readline' already loaded in Unknown on line 0
PHP Warning:  PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  Module 'readline' already loaded in Unknown on line 0
PHP Warning:  PHP Startup: fileinfo: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  PHP Startup: memcache: Unable to initialize module
Module compiled with module API=20050922, debug=0, thread-safety=0
PHP    compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
 in Unknown on line 0
PHP Warning:  Module 'readline' already loaded in Unknown on line 0

Cacti Version 0.8.7g
Plugin Architecture 2.8
PHP Version 5.2.10

[scruboy01]

I've also noticed this in the cacti log:

Code: Select all

CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'<supersecrethostname>', and OID:'.1.3.6.1.2.1.17.1.2.0' 

[scruboy01]

PHP error messages gone by disabling fileinfo and memcache extentions.

snmpget to the OID listed above works from the command line.

Anyone?

[Palermo]

Have the same problem here to.
Hope some one can help us with this one...

Or do you solved the problem?

Thx in advanced

Screen shot 2011-03-05 at 10.20.14 PM.png (28.83 KiB) Viewed 3144 times

[scruboy01]

Turns out the devices with problems had an @ in the community string. They are working now.

[Palermo]

Turns out the devices with problems had an @ in the community string. They are working now.

Oh no we have that to..
How can that be a problem..

I have to update all the switches hahahaha thats a lot..

Thx for your reaction..
Gona try this one

[Palermo]

@scruboy01

I`f changed the Com. string. Now indeed i have "up" ports and some mac addresses.

it says that i have 14 active mac`s
If i hit the mac tab i only see two addresses. where are those other addresses?

It also say 14 users ports up. But i count way more interfaces that are up.

Do you have that two?

Thx in advanced