FLOWVIEW 0.6 not displaying data

[lex8009]

I've recently upgraded to 0.8.7g and PIA 2.8. I've installed and reinstalled flowview 0.6 but it appears to only display flow data if the data are coming in on port 2055 from the cisco device. Using any other port it does not display the flow data.

I've verified that data are coming in using the tcpdump command.

I also see that the files are being created in the /netflow/flow/MIA folder.

[root@cacti ~]# tcpdump udp port 2056
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
16:48:34.166465 IP 7206.58894 > CACTI.xyz.com.2056: UDP, length 1464
16:48:34.167026 IP 7206.58894 > CACTI.xyz.com.2056: UDP, length 1464
16:48:34.168020 IP 7206.58894 > CACTI.xyz.com.2056: UDP, length 1464
16:48:35.169172 IP 7206.58894 > CACTI.xyz.com.2056: UDP, length 1464

Any assistance is greatly appreciated.