No Arp Table from Cisco IOS 15.x
Moderators: Developers, Moderators
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
No Arp Table from Cisco IOS 15.x
FYI: I have one newer router that is running IOS 15.x. It is the same model as all my other routers those routers are running 12.4. Mactrack doesn't seem able to pull the ARP table on the 15.x router.
Results for manual scan:
About to enter MacTrack Site Scan Processing
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=62
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=63
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=64
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=65
DNS Resolver process launched
A process cycle launch just completed.
Waiting on 3 with id = [-1, 0, 63, 64, 65] to complete prior to exiting.
Waiting on 3 with id = [-1, 0, 63, 64, 65] to complete prior to exiting.
Waiting on 2 with id = [-1, 0, 63, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 0 with id = [-1, 0] to complete prior to exiting.
Interum IP addresses to MAC addresses association pass complete.
MAC addresses to Vendor MACS association pass complete.
MAC VLAN's in VLAN Table Updated.
Finished transferring scan results to main table.
Finished updating site table with collection statistics.
No errors appear in the Cacti log.
Any idea on how to resolve this?
Results for manual scan:
About to enter MacTrack Site Scan Processing
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=62
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=63
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=64
CMD: /usr/bin/php -q /usr/share/cacti/site/plugins/mactrack/mactrack_scanner.php -id=65
DNS Resolver process launched
A process cycle launch just completed.
Waiting on 3 with id = [-1, 0, 63, 64, 65] to complete prior to exiting.
Waiting on 3 with id = [-1, 0, 63, 64, 65] to complete prior to exiting.
Waiting on 2 with id = [-1, 0, 63, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 1 with id = [-1, 0, 65] to complete prior to exiting.
Waiting on 0 with id = [-1, 0] to complete prior to exiting.
Interum IP addresses to MAC addresses association pass complete.
MAC addresses to Vendor MACS association pass complete.
MAC VLAN's in VLAN Table Updated.
Finished transferring scan results to main table.
Finished updating site table with collection statistics.
No errors appear in the Cacti log.
Any idea on how to resolve this?
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Upgrade to 2.9 now on the Doc's site.
TheWitness
TheWitness
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Run the scanner mannually for your router, post the results.
TheWitness
TheWitness
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
Re: No Arp Table from Cisco IOS 15.x
It's been a long time since I've gotten this, sorry. To be honest a number of projects ended up superseding this. Now it's needed again. Can you please tell me how to run that scanner manually?
Thank you
Thank you
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Re: No Arp Table from Cisco IOS 15.x
php -q mactrack_scanner.php -id=<id> -d
TheWitness
TheWitness
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
Re: No Arp Table from Cisco IOS 15.x
Here are the results of that command:
DEBUG: HOST: 10.113.1.1 is alive, processing has begun.
DEBUG: Scanning function is 'get_standard_arp_table'
DEBUG: atifIndexes data collection complete
DEBUG: atPhysAddress data collection complete
DEBUG: atNetAddress data collection complete
DEBUG: atPhysAddress MAC Address Conversion Completed
DEBUG: atEntries assembly complete.
DEBUG: HOST: 10.113.1.1, IP address information collection complete
Also, this router is a 2800 Series router, I have another 2800 Series router that MacTrack works fine on. The only difference is that the non-working router is running IOS: c2800nm-spservicesk9-mz.150-1.XA1.bin and the good unit is c2800nm-advipservicesk9-mz.124-12.bin.
I can verify that the arp table is populated on the non-working router.
DEBUG: HOST: 10.113.1.1 is alive, processing has begun.
DEBUG: Scanning function is 'get_standard_arp_table'
DEBUG: atifIndexes data collection complete
DEBUG: atPhysAddress data collection complete
DEBUG: atNetAddress data collection complete
DEBUG: atPhysAddress MAC Address Conversion Completed
DEBUG: atEntries assembly complete.
DEBUG: HOST: 10.113.1.1, IP address information collection complete
Also, this router is a 2800 Series router, I have another 2800 Series router that MacTrack works fine on. The only difference is that the non-working router is running IOS: c2800nm-spservicesk9-mz.150-1.XA1.bin and the good unit is c2800nm-advipservicesk9-mz.124-12.bin.
I can verify that the arp table is populated on the non-working router.
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
Re: No Arp Table from Cisco IOS 15.x
Witness:
I'm wondering if you've had a chance to look at this output. It would appear to me to say it's OK, but I'm still not getting data. Also, I've deleted and re-added the device to MacTrack and I get the same problem.
Are there any other logs I can look at?
Thanks,
Dave
I'm wondering if you've had a chance to look at this output. It would appear to me to say it's OK, but I'm still not getting data. Also, I've deleted and re-added the device to MacTrack and I get the same problem.
Are there any other logs I can look at?
Thanks,
Dave
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
Re: No Arp Table from Cisco IOS 15.x
Witness:
I'm not sure this is related but I found this in my /var/log/apache2/cacti_error.log:
[Mon Oct 18 16:00:37 2010] [error] [client 10.102.11.250] File does not exist: /usr/share/cacti/site/plugins/mactrack/plugins, referer: http://cacti.ketchum.com/plugins/mactra ... vice_id=78
This error occurs when ever you go in to the Device Edit Screen, and it doing it for all devices, including working ones. But I thought I would include it for completeness.
Dave
I'm not sure this is related but I found this in my /var/log/apache2/cacti_error.log:
[Mon Oct 18 16:00:37 2010] [error] [client 10.102.11.250] File does not exist: /usr/share/cacti/site/plugins/mactrack/plugins, referer: http://cacti.ketchum.com/plugins/mactra ... vice_id=78
This error occurs when ever you go in to the Device Edit Screen, and it doing it for all devices, including working ones. But I thought I would include it for completeness.
Dave
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Re: No Arp Table from Cisco IOS 15.x
The error may have something to do with the Graph Interface. I know that there are some issues there. The issue with your specific device is likely it's IOS/Operating System/SNMP Agent and not so much MacTrack, unless it's using the wrong scanning function. Routers are pretty strait forward. All you have is an ARP table and an interfaces table. So, if ARP is not working, no IP's will be detected for either that site, or a portion if it's not the only router.
TheWitness
TheWitness
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
-
- Posts: 23
- Joined: Wed Mar 31, 2010 2:33 pm
- Location: Chicago, IL
Re: No Arp Table from Cisco IOS 15.x
Witness:
I have some new info on this:
1: We recently installed a new Cisco 2900 Series Router also running 15.x IOS. It is working fine, I'm getting this router's ARP table.
2: I am still not getting the ARP table from the Cisco 2800 series router that has been giving me problems. It shows zero IP's. However, I am able to see the SNMP data in the device header.
3: I've upgraded the IOS on the non-functioning 2800 series router.
4: I see no errors anywhere to troubleshoot from.
5: MacTrack is definitely detecting the Device Type correctly on the non-functional router
6: I've deleted the Non-Functional Device and re-added it, with the same results.
What else can I check?
I have some new info on this:
1: We recently installed a new Cisco 2900 Series Router also running 15.x IOS. It is working fine, I'm getting this router's ARP table.
2: I am still not getting the ARP table from the Cisco 2800 series router that has been giving me problems. It shows zero IP's. However, I am able to see the SNMP data in the device header.
3: I've upgraded the IOS on the non-functioning 2800 series router.
4: I see no errors anywhere to troubleshoot from.
5: MacTrack is definitely detecting the Device Type correctly on the non-functional router
6: I've deleted the Non-Functional Device and re-added it, with the same results.
What else can I check?
Who is online
Users browsing this forum: No registered users and 0 guests