Hi,
I made some performance optimisations on the thold 0.41 plugin. I run a large site where I have to check about 15000 thresholds. First it taks about 100 sec per run now it takes only 14 sec.
I thought this might be interesting for some other users.
best regards
Fireball
Thold - performance optimisation
Moderators: Developers, Moderators
-
- Posts: 10
- Joined: Sat Feb 27, 2010 2:54 pm
Thold - performance optimisation
- Attachments
-
- thold-0.4.3_nitm.tgz
- (78.78 KiB) Downloaded 236 times
Re: Thold - performance optimisation
Hi,
I have performance problems with Thold. I have about 7500 SNMP polling every 20 seconds. With Spine, performance is OK (4 seconds).
But when I turn on Thold on 7500 polling, Thold takes more than 20 seconds to perform threshold check.
I'll try your Thold to see if the performance is OK. But I would know the your codes changes.
Regards,
Franck K
I have performance problems with Thold. I have about 7500 SNMP polling every 20 seconds. With Spine, performance is OK (4 seconds).
But when I turn on Thold on 7500 polling, Thold takes more than 20 seconds to perform threshold check.
I'll try your Thold to see if the performance is OK. But I would know the your codes changes.
Regards,
Franck K
Who is online
Users browsing this forum: No registered users and 7 guests