SLA Monitoring using CISCO and CACTI: Problem

sabir_mustafa · Post by **sabir_mustafa** » Fri Jun 11, 2010 8:48 am

Hi:
I have installed CactiEZ and its working fine. I wanted to add SLA functionality. The required XML files were success fully added

cacti_data_query_cisco_saa_632.xml AND cisco_saa.xml

but when I go to "Create Graph" an error message "Error in Data Query" is displayed. I am attaching the screen shot for necessary information.

Post by **TheWitness** » Fri Jun 11, 2010 9:31 am

You should change your php.ini file for now to "display_errors=Off" and then restart apache. When 0.8.7g is released you should be able to undo that.

TheWitness

sabir_mustafa · Post by **sabir_mustafa** » Fri Jun 11, 2010 9:41 am

The Red Error message still displays and I am still unable to create graph. The verbose query is showing me some error as attached.

sabir_mustafa · Post by **sabir_mustafa** » Mon Jun 14, 2010 1:14 am

Please guide me how to solve this problem.

Post by **TheWitness** » Mon Jun 14, 2010 7:48 am

I don't know this template. My suspicion is that somehow you don't have it setup properly. You will have to edit the XML and locate the OID's and make sure they are reachable using your community information.

TheWitness

sabir_mustafa · Post by **sabir_mustafa** » Mon Jun 14, 2010 10:00 am

I had downloaded the template from following link.

http://forums.cacti.net/about4136.html

The import was also successful but i am facing the problem as mentioned.

Post by **TheWitness** » Mon Jun 14, 2010 10:38 am

You have to understand how it works. Read my tagline. Your correcting this problem depends on how well you understand it.

TheWitness

Cacti

SLA Monitoring using CISCO and CACTI: Problem

SLA Monitoring using CISCO and CACTI: Problem

Still Error

SLA Monitoring using CISCO and CACTI

Who is online