CACTI log error

rastey · Post by **rastey** » Fri May 14, 2010 2:22 am

Hi All,

I am new to cacti...so questions can be silly...
I am getting below errors and grpahs are breaking

SPINE: Poller[0] Host[261] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.2021.11.54.0 ), Set MAX_OIDS to 1 for this host to isolate bad OID

POLLER: Poller[0] WARNING: Poller Output Table not Empty. Issues Found: 1, Data Sources: (DS[####])

also, I found on server, some of curl process are in hung state.
currently there is 20 host and 1100 graphs on my cacti server.
cron interval is 5 min
poller interval is 1 min

Post by **Linegod** » Tue May 18, 2010 9:26 am

Did you try, oh I don't know, doing exactly what it says to do?

rastey · Post by **rastey** » Wed May 19, 2010 1:11 am

not exactly the same..but i reduced max_oID to10 for that particular host.

and for that hung curl processes, I set max time out value to 35, after dat it seems to be ok.

but again my graphs are breaking and this time no error in log except-

SPINE: Poller[0] Host[261] ERROR: Problems parsing Multi SNMP OID! (oid: .1.3.6.1.4.1.2021.11.54.0 ), Set MAX_OIDS to 1 for this host to isolate bad OID

Sirup · Post by **Sirup** » Wed May 19, 2010 2:27 am

rastey wrote:but i reduced max_oID to10

rastey wrote: Set MAX_OIDS to 1

mhm

Hyperlord · Post by **Hyperlord** » Wed May 19, 2010 3:06 am

Hi,

increase the SNMP TimeOut to something bigger (I use more than 1k), the max OIDs to 10 and the poller protocol level to DEBUG (for 1 poller run), post Debug values here.
Sync poller and cron-times!! Both 5 or both 1 minute.

Do you use spine or cmd as poller?
Maximum threads?
etc. pp.

brgds

Post by **TheWitness** » Wed May 19, 2010 6:21 am

With a 1 minute poll interval and a 35second timeout on one script, i see no joy in your future. I suggest you run that script asynchronous to the cacti poller, and then have the poller pull the data from a file instead.

TheWitness

rastey · Post by **rastey** » Thu May 20, 2010 1:37 am

hi all..
m getting these errors also.
grpahs are breaking so much.

05/20/2010 07:33:03 AM - PHPSVR: Poller[0] ERROR: Input Expected, Script Server Terminating
05/20/2010 07:33:03 AM - SPINE: Poller[0] FATAL: Connection Failed, Error:'1040', Message:'Too many connections' (Spine thread)

please help

rastey · Post by **rastey** » Thu May 20, 2010 2:14 am

attched is the grpah.
please look into it.
why is it not coming

Post by **TheWitness** » Thu May 20, 2010 4:21 am

Increase the mysql connections in my.cnf and then restart mysql.

TheWitness

Cacti

CACTI log error

CACTI log error

Who is online